Peel Mining’s South Cobar preliminary flowsheet to factor in ore sorting

Peel Mining says positive results from ore sorting test work at the Southern Nights and Mallee Bull deposits, part of its 100%-owned South Cobar Project, in western New South Wales, Australia, provide encouragement for the inclusion of this pre-concentration technology into future process plant design.

So encouraged by this testing is Peel that it has engaged GR Engineering to integrate ore sorting technology into an updated processing plant technical report for the project.

At the same time as this, Peel announced that GR Engineering had recently completed a preliminary process plant technical report for South Cobar that considers crushing, grinding, gravity, flotation and cyanidation process stages for the recovery of gold, silver, copper, lead and zinc from the various mineralisation styles within Peel’s deposits.

Meanwhile, the recently received positive preliminary ore sorting test work results from work undertaken on diamond drilling samples shows there is potential for improvements in the flowsheet.

The ore sorting test work, completed in conjunction with ongoing metallurgical studies, was undertaken by Steinert and TOMRA.

Steinert ’s test work on Southern Nights mineralisation demonstrated strong recovery and upgrade potential with two size range samples returning, on average, circa-93% Zn, circa-91% Pb, circa-91% Ag, circa-87% Cu and circa-82% Au recoveries to an average of circa-54% of the feed mass (circa-46% of feed mass rejection) increasing the lead and zinc grades by 61% and 64%, respectively.

TOMRA’s test work on Mallee Bull mineralisation achieved significant waste mass reductions while maintaining very high copper recoveries (≥95% for the higher-grade breccia copper and massive sulphide copper samples), the company said. A lower grade breccia copper sample upgraded from 0.59% Cu to 1.05% Cu with 77% Cu recovery and 56% mass rejection, it noted.

“Positive results from ore sorting at Southern Nights and Mallee Bull deposits provide encouragement for the inclusion of this pre-concentration technology into future process plant design and, as a result, Peel has engaged GR Engineering to integrate ore sorting technology into an updated processing plant technical report,” the company said.

Peel’s Executive Director of Mining, Jim Simpson, said: “The completion of the processing plant technical report by mineral processing solutions experts GR Engineering is a critical first step in understanding the potential composition of the milling infrastructure required for the company’s development plans.

“The detail presented in the report by GR is impressive and the report will form the basis for ongoing preliminary studies for the refinement and improvement of the processing plant design as new information comes to hand.

“We are also very pleased with the potential of ore sorting as part of any future South Cobar project hub’s processing route with initial test work pointing to the amenability of both Southern Nights and Mallee Bull mineralisation to separation using 3D-XRT ore-sorting technology, allowing for the simultaneous rejection of barren or waste material whilst retaining the bulk of contained metal, and in the process, upgrading the value of the ore.”

Simpson added: “Apart from reducing the overall feed mass by the rejection of waste at early stage, other benefits of ore sorting include potentially upgrading lower-grade mineralisation and reducing the size of the processing plant offering potentially reduced capital, power, water and tailings storage needs.”