Tag Archives: Ontario

Redpath opens mobile equipment repair facility in North Bay

Automation, Equipment maintenance, Mining equipment, Mining services, , , , ,

Redpath, on the day it celebrated its 60th anniversary, has inaugurated a new state-of-the-art mobile equipment repair facility at its North Bay facility in Canada.

The new facility represents an C$8.5 million ($6.2 million) investment in the company’s North Bay infrastructure and shows Redpath’s continued confidence that the Ontario city is the ideal location for its global headquarters, it said.

The 15,600 sq.ft (1,449 sq.m) building consists of six repair bays, two inspection bays, along with welding and washing bays. Thanks to the new shop, Redpath will be able to handle the complete life cycle of any piece of equipment from its underground mining fleet in-house, it said.

The new building incorporates environmentally conscious features including solar-powered auxiliary power units, heated floors, wastewater collection and recycling, and recirculated air for ventilation.

Redpath said: “It was 60 years ago that Jim Redpath started the company with the commitment to provide superior contracting services to the mining industry. From a mere four employees in the early 1960s, Redpath today employs over 6,000 people in projects all over the world.”

RPMGlobal and MIRARCO’s AVM, VCM software to receive funding boost

Mine ventilation, Mining services, Mining software, , , , , , , , ,

RPMGlobal has announced an increase in funding for its optimisation software development program after receiving industry funds to further support the ongoing development of its decision support software for underground mining.

The support has been given by the government of Ontario through the Ontario Centre of Innovation (OCI), an organisation that supports innovators to commercialise new Ontario based technologies. RPM acquired three optimisation software modules in December 2021 from Sudbury-based MIRARCO as part of a three-year collaborative research partnership. MIRARCO is a solution research provider for the mining industry and research arm of Laurentian University.

David Batkin, RPMGlobal’s Head of Product Strategy, said it was terrific to be working with forward thinking, likeminded organisations.

“RPM and MIRARCO have had a great working relationship for the past few years, and it is fantastic to be enjoying this additional support from OCI; it will go a long way to further develop these important optimisation programs,” he said.

MIRARCO President and CEO, Dr Nadia Mykytczuk, added: “This collaboration with RPMGlobal will result in full commercialisation and deployment of tools that will benefit the mining industry. We are really excited to have our teams working together as well as bringing together new academic collaborators from Queen’s University.”

The software modules benefitting from the investment are part of RPM’s Design and Scheduling product portfolio. These modules consist of the Advanced Valuation Module (AVM) and the Ventilation Constraint Module (VCM), both of which extend and complement the functionality of RPM’s mine optimisation software solutions.

The AVM facilitates the generation of optimised underground mine plans that are robust to uncertain product prices and ore grades. The VCM generates optimised underground mine schedules based on ventilation constraints.

The funding provided by OCI, which has a proven track record when it comes to supporting software development, RPM says, will be matched by RPM and will be used to support the multi-year collaboration arrangement between RPM and MIRARCO.

Batkin concluded: “We are very thankful to OCI for this support and for having the foresight and vision to recognise the value that this technology will bring to the underground mining industry.”

Alamos upgrades expansion plans for Island Gold mine, targeting 2,400 t/d

Mineral project development, Mining services, Precious metals, , , , , , ,

Following further exploration success, Alamos Gold Inc has upgraded its expansion plans for the Island Gold mine in Ontario, Canada.

In the results of the Phase 3+ Expansion Study for Island, the company outlined a larger, more profitable and valuable operation than the Phase III Expansion Study released in 2020. This 2020 iteration looked to expand throughput to 2,000 t/d, from 1,200 t/d, through a shaft and paste plant build, costing $1.07 billion. It would result in output rising to 236,000 oz/y starting in 2025 at mine-site all-in sustaining costs of $534/oz.

Based on the results of the P3+ Expansion Study, the company says it is now proceeding with an expansion of the operation to 2,400 t/d.

This development would see average annual gold production of 287,000 oz, starting in 2026 upon completion of the sinking and equipping of a 1,373-m-deep shaft. This represents a 22% increase from the previous study and a 121% increase from the mid-point of 2022 production guidance of 130,000 oz.

While the growth capital of $756 million and sustaining capital of $777 million are both up from the 2020 study – reflecting the expansion, a larger mineable resource, and industry-wide inflation – the total capital intensity associated with the new plan has decreased 4% to $344/oz reflecting the larger mineable resource with increased ounces per vertical metre.

This infrastructure was all incorporated into the 2020 study with several scope changes to accommodate the 20% increase in production rates to 2,400 t/d including a larger mill expansion and paste plant, as well as accelerated development to support the higher mining rates. The Phase 3+ Expansion also includes 30% more development over the mine life to accommodate the 43% larger mineable resource.

Following the completion of the expansion in 2026, the operation will transition from trucking ore and waste to skipping ore and waste to surface through the new shaft infrastructure, driving production higher and costs significantly lower.

With no significant capital expected to be spent on the company’s other development project, Lynn Lake, until the P3+ Expansion is well underway, Alamos said it is well positioned to fund the expansion internally while generating strong free cash flow over the next several years.

John A McCluskey, President and Chief Executive Officer, said: “Island Gold continues to grow in every sense with our planned Phase 3+ Expansion driving the value of Island Gold to $2 billion at current gold prices. Mineral reserves and resources have increased to 5.1 Moz, supporting the Phase 3+ increase in production rates, which will create a bigger, longer-life, more profitable and valuable operation.

“As a producing mine with a well-understood cost structure, this expansion is low risk from an execution perspective, and has a significantly reduced carbon footprint. The exploration story continues to unfold with a mineral reserve and resource base that has nearly tripled over the past four years, and with the deposit open laterally and down-plunge, we expect Island Gold will be one of the lowest cost and most profitable mines for decades to come.”

Miller sells first BEV converted light utility vehicle to Alamos’ Young-Davidson

Environmental, Mining equipment, Power supply for mines, Precious metals, Sustainable mining, , , , , , , , ,

Miller Technology has announced the first sale of its new battery-electric utility vehicle for mining to the Young-Davidson gold mine, in Ontario, Canada, owned by Alamos Gold Inc.

The sale, a battery-electric conversion of a diesel-powered light utility vehicle called the Miller BEV Land Cruiser, follows trials of a Miller Land Cruiser and Miller’s ground-up battery-electric vehicle − the Relay − at Young-Davidson.

“Miller Technology’s electric vehicle is a prime example of how Canada is leading the world in green technology, reducing operating costs, reducing greenhouse gas emissions and most importantly improving employee health,” Anthony Rota, the Member of Parliament for Nipissing—Timiskaming, Ontario, said at a press conference to announce the sale. “We are proud to see them serve the world from North Bay in the riding of Nipissing-Timiskaming.”

Light utility vehicles are driven underground to safely move mining staff around the mine site. Historically, these utility vehicles have had diesel engines, which emit greenhouse gas emissions and impairs underground air quality. Miller has developed a conversion kit to exchange the diesel engine for an electric motor, in addition to a number of other mining-specific modifications to the vehicle. These vehicles are often run 24 hours a day, and Miller has patented certain aspects of its IONIC Drive system. Prior to releasing this BEV conversion, Miller had built the Relay platform.

Dan Bachand, the CEO of Miller, said: “With our original build Relay, BEV conversion kit and new projects such as an E-grader, the Ionic Drive System that Miller has developed has arrived at the top of the battery-electric heavy duty-cycle drive systems. I want to thank our team members for their hard work. All of our staff have helped get us to this point.”

He added: “I want to thank Alamos Gold for their courage and commitment to battery-electric vehicles and emissions reductions. This is a great step forward by Alamos Gold to reduce diesel fumes and emissions, helping with employee health, fossil fuel reductions and to slow global warming.”

Léon Grondin-Leblanc, General Manager, Young-Davidson, said: “The Young-Davidson mine’s emission intensity is less than half the industry underground mine average as a result of increased electrification and automation of our lower mine infrastructure, which we completed two years ago, and today’s announcement is yet another step forward.”

MacLean opens doors to R&D facility, shows off latest mining innovations

Automation, Environmental, IoT, Mining equipment, Mining services, Power supply for mines, Sustainable mining, , , , , , , , , , , ,

MacLean has opened the doors to its Research & Training Facility in Sudbury, Ontario, for the first time since acquiring the underground R&D lab in 2018.

The company welcomed industry VIPs to tour its facility and get behind-the-scenes access to the range of MacLean product development spanning mobile equipment electrification, automation and digitalisation.

Guests had the chance tour the ‘Ducky Decline’ to get demonstrations of MacLean ground support installation robotics, as well as video remote control for the secondary reduction application in the underground mining cycle. In addition, the open house also provided the chance for visitors to get up close with a battery-electric version of the company’s latest model of shotcrete sprayer – the SS5 with Quickscan thickness imaging (graphic below) and Chemsave accelerant savings technologies – as well as the latest addition to the MacLean Utility Vehicle product line – the GR5 Grader – purpose-designed for the rigours of the underground environment.

“The pandemic didn’t set us back in terms of pushing forward with product development, but it did force us to delay being able to show the mining world just how much of an innovation engine this underground facility truly is for us,” MacLean President, Kevin MacLean, said. “I was thrilled to be there with Don this week to welcome everybody and deliver the message in person: MacLean is committed to investing in paradigm-changing mining vehicle innovation that helps make the industry safer and more productive.”

Stella Holloway, MacLean Vice President of Northern Ontario Operations, added: “Our Research & Training Facility is also an active collaboration space with the broader industry, through our existing training partnership with Cambrian College’s Centre for Smart Mining and the great work we’re doing training the next generation of mine worker. Now that we have the ability to open our doors and show, not just tell industry colleagues what we’re doing as a mining innovators, it feels great – I look forward to this type of in-person dialogue getting reinstated and ramping up in the months and years to come.”

Maarten van Koppen, MacLean Vice President of Product Management, said the company was cognisant that there are hurdles to broader adoption of electrification, automation and digitalisation across the global mining industry, but he stressed that the upside benefits meant the effort was worthwhile.

“That’s why having this facility is so critical to our ability to deliver mobile equipment solutions that not only solve today’s problems, but also create the foundation for the next generations of mine design and operations around the underground mining globe,” he said.

David Jacques, MacLean VP of Engineering, stated: “The company as a whole persevered through the pandemic to get rigs designed, built, shipped and commissioned, which wasn’t always straightforward. It’s why they call it ‘innovation’ – not just continually improving the way things are currently done, but also asking: is there a different way to tackle this problem that will deliver paradigm-changing safety and productivity dividends? This is how we think at MacLean, and the Research & Training Facility allows us to put that philosophy into action.”

Drilling innovation directs Alamos to golden goods at Island

Environmental, Mine operation news, Mineral exploration, Mining equipment, Mining services, Mining software, Precious metals, Sustainable mining, , , , , , , , , , , , , , , , , , , , , ,

John A McCluskey, President and CEO of Alamos Gold, tends to look forward, not back, when talking about strategic decisions the Toronto- and New York-listed miner has made during his 18 years heading up the company.

When discussing the acquisition of Richmont Mines, which included the flagship Island Gold Mine asset in Ontario, he allows himself a brief rumination on the market’s first impressions of the deal: “We acquired the asset for around $620 million in November of 2017. The consensus view in the market was we had overpaid for the asset.”

That consensus view considered 1.8 Moz of mineral reserves and resources and production around the 100,000 oz/y mark, among other factors.

“In less than three years, we had Island over the 4 Moz reserve and resource threshold – we’re now nearer to 5 Moz – and the consensus valuation for the asset from analysts covering us is around $1.4 billion.”

That new valuation factors in a production rise – the company is anticipating gold output of 130,000-145,000 oz this year – and long-term growth prospects for the asset. The latter is evidenced by an Island Phase Three Expansion study published last year that envisaged a 2,000 t/d operation (currently 1,200 t/d) able to produce 236,000 oz/y starting in 2025.

While McCluskey says the company was aware of these growth prospects back in November 2017, most market observers will be surprised they have been proven up so quickly after the Richmont Mines transaction.

They probably underestimated what the use of surface directional drilling could do at Island.

Originally leveraged by Richmont Mines’ Chief Geologist and now Island Gold Chief Geologist, Raynald Vincent, back in 2015, the exploration technique has allowed Alamos to successfully step out from and infill holes Richmont and predecessors previously drilled.

Scott R.G. Parsons, VP of Exploration for Alamos, says surface directional drilling, in combination with the exploration team’s understanding on the controls on gold mineralisation at Island and Alamos’ financial backing for exploration, has helped the company grow the asset rapidly.

“The significant resource and reserve growth at Island in the last three years – adding 3 Moz net of 500,000 of mining depletion – was largely driven by surface directional drilling,” he told IM. “We could not have moved the asset forward in such a significant way without it.”

The use of what Parsons says are “standard” surface drill rigs and Devico’s DeviDrill™ steerable wireline core barrels are allowing the company to hit mineralisation far below the mine’s existing underground infrastructure. The DeviDrill tool can make multiple branches from a pilot hole, dramatically reducing both the time spent and the cost of drilling when compared with standard core drilling methods. At the same time, no time is lost on moving the drill rig between branch holes, as the core barrel can be steered from surface to complete the optimal drill patterns.

The DeviDrill tool can make multiple branches from a pilot hole, dramatically reducing both the time spent and the cost of drilling when compared with standard core drilling methods (photo: Devico)

The company has drilled 240 surface directional drill holes at Island for about 200,000 m of drilling using only 27 drill sites, Parsons explained.

“Using conventional surface drilling, the 240 holes would have required significantly more drill sites,” he said.

This would have involved moving the rig more frequently, making the process that much slower and expensive.

Instead, thanks to this directional drilling technique, the company is sitting on an additional 3 Moz of gold resources and reserves garnered in the last three years. This has come with a discovery cost of just $11/oz.

Accuracy, as Devico indicated, is another benefit of this technology.

“Surface directional drilling is not only more effective than standard drilling practices, but we can hit our targets with 1% accuracy,” Parsons added. “So, if we’re drilling a 1,500 m hole, we can typically intersect our target within 15 m from plan, 1,500 m downhole. This predictable drilling spacing is critical for defining a mineral resource with the appropriate confidence level.

“You’d never be able to do that with standard surface drilling.”

This technique is not a silver exploration bullet, though. According to Parsons, it does not work everywhere.

“It really all hinges around the quality of the orebody and our understanding of the deposit and the controls and the mineralisation,” he said. “Knowing we require a certain drill spacing to be able to define inferred mineral resources, we strategically target the down-plunge extensions of the ore shoots.”

At Island, these ore shoots – which are the high-grade portions of the deposit – are laterally extensive in the lateral and vertical sense, Parsons explained.

“With the surface directional drilling, we are able to specifically target these down-plunge extensions,” he said. “With one or two pilot holes and branch patterns, we can evaluate a large area down-plunge and along strike of the existing mineral reserves and resources. In some cases, other gold deposits can have ore shoots that are less predictable, or are not as extensive, so it would be a challenge to apply surface directional drilling without having a strong understanding of the controls of these shoots for targeting.”

And, it should not be forgotten, it requires an investment in exploration that goes beyond simply reserve and resource replacement on an annual basis. Richmont, a much smaller company, was unable to bankroll such a strategy.

Alamos has made a commitment to do this, as evidenced in the 16-year mine life outlined in the Island Phase III study and the $25 million it intends to invest in exploration this year.

The use of surface directional drilling looks set to continue paying off beyond this study, with the company recently drilling its best-ever hole to date by leveraging the technique.

Drill hole MH25-08 – 71.21 g/t Au (39.24 g/t cut) over 21.33 m – in addition to MH25-04 (28.97 g/t Au (26.89 g/t cut) over 21.76 m) have true widths approximately four times greater than the average width of the large high-grade inferred resource block defined up-plunge of them (photo: Alamos Gold)

Drill hole MH25-08 – 71.21 g/t Au (39.24 g/t cut) over 21.33 m – is the hole in question. This hole, in addition to the previously reported MH25-04 (28.97 g/t Au (26.89 g/t cut) over 21.76 m), have true widths approximately four times greater than the average width of the large high-grade inferred resource block defined up-plunge of them. This, the company said, demonstrates the zone has widened in this area, providing even further potential beyond the company’s current growth plans.

“That one – MH25-08 – is the best drill hole ever drilled at Island,” Parsons said. “And that is after 1.3 million metres of drilling and over 7,000 drill holes dating back nearly 100-years.

“That speaks to the potential of this deposit to continue to grow through exploration, and also highlights the prospectivity of the Michipicoten Greenstone Belt.”

More to come

With 27,500 m of surface directional drilling scheduled for 2021 – and only 6,683 m carried out as of May 31 – more of these high-grade intercepts could soon come to the fore.

And Parsons says the company can continue to use surface directional drilling some 500 m below where it is currently drilling down to at Island.

On top of that, the company, having established the necessary underground exploration infrastructure, is equipping its underground drill rigs at Island for directional drilling, with 24,000 m of underground directional drilling planned this year (3,233 m completed as of the end of May).

“This is allowing us to reduce our cost per metre compared with surface directional drilling and allowing us to drill more targets in a shorter amount of time,” Parsons said. “We will continue applying directional drilling technology as long as the orebody is continuing at depth to drill off those ore shoots.”

At Young-Davidson, the company’s other core asset in Ontario, Canada, the company is also making plans to use underground directional drilling.

“One of our plans going into 2022 is to evaluate opportunities to utilise directional drilling from underground exploration drifts established in lower and mid mines at Young-Davidson to target mineralisation down-plunge at depth,” Parsons said.

More broadly, Parsons thinks the company’s exploration team can leverage their understanding of the technology at other assets.

“For us, it is a competitive advantage,” he said. “With a solid geological understanding of the deposit you are looking at and an understanding of the application and the benefits of directional drilling, we can recognise opportunities of what could be occurring at depth where others might not see potential until well into the future after underground infrastructure is established at depth.”

There are obvious cost, time and accuracy benefits to using directional drilling, yet there is another benefit that may get lost along the way.

Without the need to constantly move the surface drill rigs between drill pads, the footprint of these rigs is reduced.

McCluskey says the technology has brought another ESG advantage to Island too.

By being able to quickly drill off more targets and convert these into the resource base, Alamos has been able to think long term with its Island Gold Phase III Expansion and justify the expense of a shaft and paste backfill plant.

This comes with a 35% reduction in emissions compared with using the mine’s existing ramp and diesel-powered truck haulage, he said, explaining that much of the Ontario grid is powered by renewable hydroelectricity.

“This technology has given us the exploration success that has been converted into scale and allowed us to think longer term and afford the infrastructure to make it a ‘greener’ operation,” he said.

With such a long list of benefits, more companies will be looking at directional drilling to prolong the life of their assets and make long-term decisions that make economic and sustainable sense.

Evolution enlists RCT and its Guidance Automation tech to transform Red Lake gold mine

Automation, IoT, Mine operation news, Mining equipment, Mining safety, Mining services, Precious metals, , , , , , , , ,

Evolution Mining has selected RCT and its ControlMaster® Guidance Automation technology to help “transform” its new Red Lake mine in Ontario, Canada.

Evolution has embarked on a three-year investment strategy to restore the newly acquired Red Lake mine to a safe, highly efficient, long life and low-cost operation providing strong value for shareholders. This followed its acquisition of the operation from Newmont in November 2019 in a deal that could eventually rise to $475 million.

RCT has previously worked with Evolution Mining on transitioning its Mungari operations in Western Australia’s Goldfields region to its fully-autonomous technology solution.

To assist in the Red Lake turnaround strategy, RCT will commission its interoperable and scalable ControlMaster Guidance Automation technology to the underground loader fleet.

RCT says it is working closely with Red Lake’s leadership team to seamlessly integrate the new technology to enable greater productivity efficiencies to support Evolution Mining’s transformation strategy.

“The technology will unlock significant value for Evolution Mining by ensuring optimal machine performance, higher speed autonomous tramming, and reduced machine damage,” RCT said. “The technology will deliver faster production cycle times and reduced unplanned downtime across the loader fleet.”

The loaders will be controlled from either the surface-based ControlMaster Automation Centre or the customised underground Automation Centres designed specifically for easier transfer via the mine shaft hoist system.

This solution safeguards machine operators by relocating them away from hazards commonly found at the mine face and significantly reduces shift handover times, lowering overhead costs and resulting in greater site efficiencies, RCT said.

Kirsty Liddicoat, Red Lake General Manager, said: “We are very pleased to be partnering with RCT to introduce modern technologies to Red Lake as part of our transformation process. RCT equipment will enable higher productivity and efficiencies from our underground scoop fleet, while improving safety for our people.”

RCT’s Mining Business Development Manager, Ryan Noden, said ControlMaster is an ideal solution to help deliver the operational transformation that is aligned to Evolution Mining’s Red Lake strategy.

“The advanced features of the ControlMaster Automation technology means Red Lake will be able to quickly achieve improved production efficiencies from its loader fleet, with a greater level of safety for its operators,” he said. “Red Lake will also benefit from selecting a truly interoperable technology provider that can collaborate closely with them to realise further mobile equipment automation opportunities as further optimisation of the asset is achieved.”

Noden added: “RCT has a proud history of delivering value to the Canadian mining sector and we look forward to continually delivering to them with our cutting-edge technology backed by our dedicated in-country support team based at the company’s facility in Sudbury, Ontario.”

Evolution’s vision is to restore Red Lake to be one of Canada’s premier gold mines sustainably producing 300,000-500,000 oz/y of low-cost gold, Jake Klein, Evolution’s Executive Chairman, has said.

Metso Outotec to supply Vertimills, cone crusher to IAMGOLD’s Côté project

Comminution of minerals, Mineral processing, Mineral project development, Mining equipment, Mining services, Precious metals, Sustainable mining, , , , , , , , , , ,

Metso Outotec is to supply key comminution technology to IAMGOLD Corporation and Sumitomo Metal Mining’s joint venture Côté gold project, in north-eastern Ontario, Canada.

The delivery consists of two energy-efficient Vertimill® 4500 grinding mills (pictured) and one MP1250 cone crusher for the Côté gold project.

Andy Lingenfelter, Vice President, Minerals Sales, North & Central America, Metso Outotec, said: “Low energy and wear part consumption, as well as process flexibility, were decisive factors for the Côté gold project team when selecting the comminution equipment.

“Metso Outotec was consulted during the prefeasibility study and supported IAMGOLD on several projects. IAMGOLD’s technical team had solid confidence in the Vertimill technology, and they were also familiar with the high-performance capability of the MP crushers.”

The value of the order exceeds €10 million ($11.9 million) and has been booked in Minerals’ March quarter 2021 orders received.

Côté comes with estimated contained gold reserves of over 7 Moz. Construction of the gold mine commenced in late 2020, and is expected be completed in mid-2023.

MacLean reinforces shotcrete ops with new EV sprayer, transmixer

Automation, Environmental, IoT, Mining equipment, Mining services, Mining software, Power supply for mines, Sustainable mining, , , , , , , , , ,

MacLean Engineering has become renowned for its battery-electric equipment in the last four-to-five years, having announced its electrified plans at MINExpo 2016, and steadily upped its offering in line with industry demand.

Yet, it is not the only company in its field backing battery-powered production support developments underground.

Recognising the same trend that led to MacLean initiating its EV Series program in 2015, its competitors have also looked to electrify their own diesel-powered units.

Few of them to this point have clocked up the same amount of operating hours on battery that MacLean can boast; even fewer of them have gone beyond the limits of their diesel-powered predecessors with the adoption of new opex-enhancing technology and safety additions.

The company is now leveraging this experience with the launch of a new shotcrete-transmixer combination that, MacLean says, will make it the only OEM able to offer fully electrified, articulated shotcrete operations purpose-designed for underground mining applications.

Jonathan Lavallee, Product Manager – Shotcrete Equipment, got IM up to speed with developments.

“The SS5 battery-electric shotcrete sprayer is now mechanically complete,” he said ahead of the launch today. “We’ve tested it at our underground test mine and it has exceeded our expectations.”

Filling out an offering of shotcrete sprayers that includes the diesel-powered SS2 and SS3 machines, the battery-powered SS5 shotcrete unit is close to 7 ft (2.13 m) wide and is the first-ever MacLean sprayer to have a forward-facing cab for a better view of shotcreting operations from inside the cab.

In addition to a better view, the shift from mid-ship to forward-facing cab has also aided with placing the batteries and the EV components on the rear side of the machine to ensure rebound dust and particulates from shotcrete operations are not getting inside the EV components, Lavallee said.

Alongside this machine will be the 2.59-m-wide battery-powered TM3 concrete transmixer, which is based on a diesel-equivalent machine already on the market and will serve the SS5’s shotcrete needs.

Like all of MacLean’s EV Series machines, the SS5 sprayer will be able to tram on battery and connect to the power infrastructure within the mine for spraying.

This might not be all, according to Lavallee.

“Depending on the size of your heading, the battery re-generation capability on site and the air quality/quantity, there could be an option to shoot on pure battery,” he said.

Testing at the MacLean Research and Training Facility in Sudbury saw the prototype machine complete two full mixer trucks worth of shotcrete – roughly 12 cu.m – while still having enough battery power remaining to conduct a thorough wash down and washout of the equipment and tram to the nearest point of recharge, according to Lavallee.

While there was no on-board compressor fitted to this prototype – with the machine using mine air at the test facility – Lavallee is confident the commercial unit will provide the option of spraying off battery for parts of a mine where power services have not yet been established.

“Depending on the size of your heading, the battery re-generation capability on site and the air quality/quantity, there could be an option to shoot on pure battery [with the SS5],” Jonathan Lavallee says
There is more to the SS5 than battery-powered operation alone, which Lavallee, a man with shotcrete experience at Oyu Tolgoi, Grasberg, Outotec and GCP Applied Technologies, is keen to talk up.

Fitted with a “first of its kind” automatic accelerator dosing system and the company’s Auto Doser platform, Lavallee says the machine will allow operations to save money on shotcrete consumption, increase the quality of material going onto the walls and, most importantly, create a safer environment for miners.

“My mission has always been to ensure the product is 100% quality and reacts and solidifies as it is supposed to without causing any falls or damage to personnel or equipment,” he said.

Other than the new accelerator, the system will use sophisticated scanning technology for shotcrete thickness monitoring.

“That will, again, enable you to enhance the quality of the material going onto the drifts and headings,” Lavallee said. “It will also eventually help with cost reductions through reducing overshooting.”

These elements, combined, could have a significant impact on the operating cost associated with the SS5, with Lavallee hinting at 30-60% savings from the dosing system, and plus-20% savings in shotcrete consumption with the use of the accelerator and real-time scanning technology.

The Australia market will be the first to test out the new sprayer, with a unit set to be delivered to a customer site in the June quarter. Ahead of this, it is heading to the company’s branch in Elko, Nevada, for additional testing.

This unit will also be equipped with a newer type of battery MacLean is currently putting through its paces, in addition to an in-development compressor.

MacLean, again, appears to have not only electrified its mining equipment niche; but reinforced it with all the technology smarts forward-thinking miners are after.

Harte Gold goes with the Watson-Marlow flow at Sugar Zone

Comminution of minerals, Equipment maintenance, Mine operation news, Mineral processing, Mining equipment, Precious metals, Water management, , , , , , , , , , ,

Harte Gold’s wholly-owned Sugar Zone Mine in Ontario, Canada, is now benefiting from the adoption of Qdos and APEX peristaltic pumps from Watson-Marlow Fluid Technology Group (WMFTG).

Having deployed the pumps in two important applications, the Sugar Zone team are now enjoying far better flow rate efficiency, along with significant reductions in both maintenance requirements and downtime, according to WMFTG, with the miner subsequently looking to invest further in the company’s pumping technology.

The Sugar Zone Mine entered commercial production in 2019 and has an anticipated operating life of around 13 years at current output levels. Producing 60,000-65,000 oz/y of gold at a 800 t/d throughput rate, a mine expansion study is currently in progress to support a 1,200 t/d rate.

In the reagents room, Harte Gold operates eight diaphragm pumps on a 24/7 basis. However, issues over insufficient process efficiency, the amount of maintenance time needed to replace diaphragms and the potential for leaks prompted the company to look at alternative solutions.

Harte Gold invited WMFTG to trial its Qdos 30 chemical metering pump. For a period of one month, the mining company compared the Qdos with an existing electric diaphragm pump dosing flotation reagents such as potassium amyl xanthate (PAX).

With a flow rate for PAX of 100-300 ml/min, the Qdos 30 significantly outperformed the diaphragm pump on flow rate efficiency, according to WMFTG. Although the dosage rates were adjusted as required before and during the trial, the Qdos outputs were noticeably more consistent in comparison with the existing pump, bringing potential for process optimisation.

ReNu peristaltic pump head technology is at the core of the Qdos pump and is key to its success at Harte Gold, WMFTG says. ReNu ensures accurate and repeatable chemical dosing and, thanks to its contained design with integral leak detection, reduces wastage and eliminates any potential for operator exposure to chemicals.

In addition, Harte Gold personnel confirmed both operations and maintenance were trouble-free during the trial runs. Indeed, there were favourable reports of the colour TFT display, which shows both flow and speed, while the maintenance team was in full support of the single, no tools ReNu pump head replacement.

Such was the success of the trial that Harte Gold is now looking to gradually phase-out all eight of its existing diaphragm pumps in the reagents room over the coming few months. Although control of the first Qdos 30 on site is manual, the company will adopt 4-20 mA I/O moving forward, according to WMFTG. Harte Gold is also planning to replace diaphragm pumps with Qdos models on the water treatment side of its business.

In another area of its operations, Harte Gold has replaced an existing peristaltic pump (not Watson-Marlow) with an APEX 35 in a 24/7 application. Here, the pump transfers thickened gravity concentrate from a gold decanting tank to a shaker table. However, the company found itself replacing hoses every week in its existing peristaltic pump.

The company already had an APEX 35 in operation so thought the same model would provide a good solution for the thickened gravity concentrate. Instead of the one week hose life previously achieved, the APEX 35 with NR hose lasted for 12 weeks, reducing both maintenance and downtime in this critical application. Now, only four hoses are required per year, rather than 52, equating to a 1,200%-plus gain in maintenance intervals, the company said.