Ahead of the slurry pipeline article in the December issue of International Mining, Polypipe asks the question are mine operators overspending on pipes and pumps? The company notes that in peak production, pumped water management systems are an absolute necessity and the associated pipework must be capable of withstanding a specified internal pressure. However, towards the end of a mine’s water cycle, pressured systems are still being specified when gravity pipes would be appropriate and more economical. Philip Wood of Polypipe, a leading manufacturer of plastic piping and water management systems, looks at the options to reduce costs for mine operators.

“While many mining applications will rely upon the delivery of high-pressure water, therefore requiring high power pumps and heavy duty pipework, there are other aspects of effective water management systems that can often be run without the need for pumps. Tailings management and heap leach processes can sometimes be configured to use ‘cost free’ gravity flow instead, along with general rainwater or storm water drainage management as non-pressurised systems. However, it is common to see pumped pipes systems specified for such applications – leading to unnecessary expenditure both on the pumps and high-specification pipes themselves, but also on the ongoing maintenance of the pump itself. Similarly, higher-pressure pipes are frequently specified where there is no benefit in doing so. Fully certified, high-quality, high density polyethylene (HDPE) pipes designed for gravity application pressure grade would still provide all the required corrosion and abrasion resistance required of mining applications without the added expense of a higher Bar rating.

“All pressure pipelines carry a Pressure Nominal (PN) grade which indicates the pressure (in bar) the pipe can support when the water inside is at 20°C. For all too many gravity applications, PN10 or even PN16 is frequently specified, when in actuality the water or slurry within is drip-fed, meaning a less expensive gravity pipeline will be more than sufficient for the purpose.”

Pump manufacturers typically estimate that up to 90% of a pump’s lifetime cost is attributed to energy usage, wear and parts – making them one of the most expensive components on a mine site and even more costly if they are specified when not truly required. Poorly maintained pumps or those working in the harsh conditions typical of mining environment fare even worse, with one leading German pump manufacturer estimating that, of the 2,700 pumps they have examined since the 1980s, more than a third were running at less than 40% efficiency. These high operating costs can, in some cases, be avoided by designing in a gravity flow solution in preference to a pumped system. Polypipe can assess a mine’s water management system design to determine if a pumped system is required, identifying areas where a gravity flow system would be appropriate and more cost effective.

In designing an efficient and safe tailings management facility, establishing a stable water balance will prevent future problems such as overflow. This can be achieved by taking into account not only the daily in- and outflow expected of the facility, but also allowing for storm surges. Using a series of gravity pipes to drain into the tailings pond itself can help maintain a manageable, steady flow, while at the other end of the system, gravity pipes can be used to decant water from the dam walls to water treatment facilities.

Bypassing pumped systems at the recovery and wastewater stages of heap leach operations can provide tangible cost benefits, but must be carefully planned to ensure the chosen pipes perform at their optimum level. At the specification stage, the American Water Works Association (AWWA) offers the following guidance in its Standard for PE Pressure Pipe and Fittings (1990): “The working pressure of the system plus recurrent surge pressure associated with a specific piping arrangement or operation should not exceed 150% of the pipe pressure rating.”

For gravity flow or low-head pipeline applications, HDPE is proven as an effective solution thanks to its smooth bore and low resistance to flow. If large volumes of liquid are being transported, there is also very low friction within HDPE pipes, meaning less drag or turbulence at high flow rates and greater resistance to scaling than traditional materials. Used for non-pressurised surface and subsurface drainage as well as sanitary sewers, leachate collection and storm drainage, HDPE solutions are easy to install and maintain while providing the robust durability required of mining environments. Importantly, HDPE has the capability to transfer its load to the surrounding soil and substrate under stress, resulting in long-term structural stability and assisting in the longevity of the pipeline.

Regardless of the PN grade, all HDPE pipes possess the key characteristics that make them suitable for mining applications. Highly resistant to abrasion from both minerals and substrate carried in slurry, they are also resistant to many of the chemicals commonly used in mining and mineral extraction – including acetatic acid, ammonium hydroxide, hydrogen peroxide and calcium hydroxide.

Using a gravity flow system will not only deliver cost savings in terms of avoiding expensive pumps, ongoing maintenance and high-pressure pipes – HDPE pipes are lighter than traditional materials and are therefore cheaper, easier and safer to transport and install. They can be supplied in longer lengths than more expensive concrete or ductile iron solutions, meaning fewer joints are needed which further reduces the possibility of leakage. Ideally suited to harsh operating environments, HDPE water management solutions can withstand temperatures in the range of -40°C and +60°C.

“Polypipe’s PE100 solution is an effective intermediate pipe solution with all the benefits of PE, capable of handling up to 25 Bar pressure depending on the temperature. Ridgidrain, meanwhile, is an HDPE twin-wall pipe solution for non-pressurised drainage applications which is up to 94% lighter than concrete and features a structured wall design for high ring stiffness and strength. For additional storm surge water storage, Polystorm is a crate-based, modular water storage system which can be integrated with either PE100 or Ridgidrain to provide emergency storage for excessive rainwater or for attenuation and soakaway systems.

“Correct specification of pipes for mining applications can help save money in several ways; from the initial purchase cost, to the added expense of running an unnecessary pump system when gravity could be exploited within tailings management and heap leach applications amongst others. Working closely with a water management specialist such as Polypipe can help optimise a mine’s pipeline design without compromising on quality of materials. When a pipeline points downhill, Polypipe’s recommendation is to use the power of gravity.”