The superiority of genuine Warman® pumps and parts has been proven in a trial comparing the performance of a Warman MCR® 250 pump with a Warman AH® pump fitted with non-genuine spare parts at Agnico Eagle Mines’ LaRonde gold mine in Quebec, Canada, Weir Minerals says.

The mine had been using two Warman AH 12/10 slurry pumps to manage its SAG mill discharge since operations commenced in 1988. While these pumps were the latest technology at the time, the very coarse slurry was causing the pumps to wear out after just 1,600 hours, according to Weir.

“When a replicator proposed a trial of non-OEM pump liners and parts instead of our genuine Warman parts, they promised to double the wear life of the existing pump components,” Mike Swintak, Regional Senior Product Manager for Weir Minerals, said. “Our engineers investigated the root cause of the wear life problems experienced and decided a Warman MCR pump would achieve much better results compared to the AH pump with non-OEM parts.”

Instead of doubling it, the other manufacturer’s liners and impellers decreased the pump’s wear life by 300 hours, wearing out after just 1,300 hours. In addition to requiring six rebuilds per year, the non-genuine parts interrupted production due to discovery of premature cracks in the liner, Weir said.

Meanwhile, the Warman MCR 250 pump achieved 3,000 hours of continuous operation, requiring only three rebuilds and lowered spare parts costs alone by 36%, or $70,000 per year.

Swintak said: “The fantastic results achieved at LaRonde weren’t just due to the superior wear resistance offered by the pump’s Ultrachrome A05 wear material and superior hydraulic design of the MCR pump. Our engineers worked closely with Agnico Eagle operators to remove problems throughout the circuit contributing to the low wear life being achieved, such as revising their pump box level control procedures and monitoring system to ensure a constant level of 50-75%.”