With seven installations of the Joy Flexible Conveyor Train (Joy 4FCT) globally – all operating in room and pillar extraction and an upcoming installation in longwall entry development – more and more operations are reporting significant advances in safety and productivity through the use of continuous haulage technology. The Joy4FCT is a single-operator, continuous haulage system that conveys product from the face to the panel belt, while simultaneously tramming and following the continuous miner through multiple drive sequences.
Joy says that “from this truly continuous mining method, operations are greatly enhancing zero harm initiatives while realizing a considerable increase in tonnage output when compared to their previous use of typical batch haulage methods.
“The Joy4FCT improves safety by combining all haulage into a single system operating at a low tram speed and following a fixed path of travel, while requiring only one operator using remote control. This reduction in the total number of mobile machines in the section reduces visibility concerns as well as dust generation from multiple travelways. Due to a chain traction system distributed along the entire length of the machine, the 4FCT offers greater traction and a lower ground bearing pressure over that of conventional haulage machinery. Also, the 4FCT’s integral continuous mining power cable management reduces trailing cable damage.
The Joy4FCT delivers improved productivity through its ability to more than double tonnage output per miner personnel when compared to batch haulage applications – first by eliminating the bottlenecks and car wait times typically associated with batch haulage – and next through a number of design innovations. The Joy4FCT incorporates an integrated inbye-lumpbreaker which eliminates the need for a separate feeder-breaker in the section. The system also offers belt advance automation as well as automated retreat mining capabilities, made possible by the inclusion of a Dynamic Move-Up Unit (DMU).”
Acting as an interface between the Joy4FCT and the mine’s panel belt, the DMU and Joy4FCT are available in two configurations – a side discharge for low seam heights and wide entries; or an over-the-top unit (OTT) suited to higher seams and restricted widths. Note that the OTT system is a self-advancing unit with remote controlled panel belt move-ups; and can also be designed for retreat mining. The side discharge design must be advanced using the continuous miner to pull up.
The first Australian installation of the Joy4FCT began in 2010. This Australian installation is the first 4FCT system with retreat mining capability and dual-function radio remote control. Depending upon the panel layout and entry dimensions, mines such as the one in Australia may realize up to 75% additional utilisation of reserves when using the retreat mining method, Joy reports.
A room and pillar installation in the US Illinois Basin operates in a seam height of 2.4 m and has reported a best month of 182,300 t. Its best day, consisting of two nine-hour production shifts, is recorded at a 413 m advance totaling 10,250 t. “Also significant is that the continuous miner in front of the Joy 4FCT was a Joy12CM27 that had already recorded 3.1 Mt,” Joy says
Continuous haulage methods deliver an average of 30% more productivity over batch haulage methods. The Joy4FCT increases the safety and productivity of mining operations by eliminating car waiting times, decreasing the amount of section equipment and the number of section personnel required, easing the management of cable systems and equipment proximities, and boosting production through automated belt advancement and retreat mining capabilities.