Sandvik launched its first 400i-class drill, Sandvik DD422i development jumbo, in 2013 and subsequently expanded with the electric Sandvik DD422iE. The upcoming relaunch includes Sandvik DL432i and Sandvik DU412i longhole drills and Sandvik DS422i cable bolter, as well as an extensive automation update.
“There are three crucial factors that we need to address and improve in all of the 400i-class applications: safety, productivity and process control,” Naapuri says. “That requires in-built intelligence, but then you need to manage the significant amount of data the equipment generates and use it to optimise operations.”
All 400i-class drills are based on standardised mechanical solutions and component commonality, with obvious benefits in terms of operator training, maintenance and spare part logistics. Common interfaces and consistent layouts are easy to learn, making it simple for operators to switch rigs when necessary.
The Sandvik DL432i is the first fully automatic and digitalised longhole drill by Sandvik. Like all 400i-class drills, it links up with advanced mining automation via the AutoMine fleet management system. The main application for top hammer longhole drills is ore production with Ø64–102 mm holes up to 38 m in depth, using T38, T45 and T51 MF rods or Ø65 mm (T45) and Ø76 mm (ST58) tube rods. “Sandvik DL432i offers major improvements in all three key design criteria of longhole drills that have remained unchanged for years: process control, safety and productivity. The new drilling system, including the powerful RD927L rock drill, proven drilling module, telescopic boom with large drilling coverage and iSOLO drilling control system, lays the basis for high capacity and good process control.”
Sandvik DU412i is an ITH longhole drill designed for underground mining in production drifts of 4 by 4 m or larger. Equipped with 3 in to 8 in ITH hammers and Ø3 in to Ø5 in (76-127 mm) drill pipes, it can drill vertical and inclined fans and single or parallel Ø3½-8½ in (90-216 mm) long holes. In addition to conventional production and development drilling duties, the mission profile of Sandvik DU412i includes service support, where single long holes are drilled for service use or as pilot holes, to be reamed to 30 in in slot raising applications.
The compressed air system of Sandvik DU412i relies on an onboard booster and new efficient adaptive air system control to increase the 4-to-7 bar mine air system pressure up to 28 bar. Several booster sizes are available to match the needs of different hammer sizes and specific requirements in different mines.
“The Sandvik DS422i combines a powerful and ergonomic rig for rock support and advanced automation options, such as the cement mixer that eliminates all manual cement bag handling,” says Anssi Kouhia, product manager for rock support drills. “This is a productive and safer machine for hard use.”
A new asset in the Sandvik DS422i is the advanced boom manipulator mode, a functionality where the operator navigates the bolter boom to the tunnel segment to be bolted and locks the boom X, Y or Z axis, after which the automation system is capable of independent movement for specific boom movements.
“Advanced Silver- and Gold-level automation solutions are a welcome addition for bolters. In practice the operator manually trams the rig to the correct position, after which the automation system handles the drilling cycle. Positioning the grout pipe and pumping cement into the hole again require manual control. The automation gives the bolter automatic drilling and cement mixing capabilities, eliminating most of the tasks that would require the operator to leave the cab. The water/cement ratio and the batch size are simply typed in, and the automatic cement mixing process takes care of the rest. In addition to operator safety, this also improves the consistency of cement mixes and consequently the quality of bolting.”
The new Sandvik 400i launches are also designed for continuous 24/7 operation through an automation upgrade package made available for the proven Sandvik DD422i and Sandvik DD422iE development drill rigs.
“The productivity and cost-effectiveness challenges the industry faces leave less and less room for downtime caused by shift changes, blasting and ventilation breaks,” says Johannes Välivaara, Product Manager for underground development drills. “This is something we wanted to address with the new upgrade package.”
The upgrade includes a new boom collision avoidance system based on dynamic recalculation of the boom path during automatic movements between holes, enabling identification of potential collision risks and avoiding them in advance by rerouting. This not only avoids collisions and potential damage to the equipment, but it also keeps the production running, even during unmanned operation, which significantly improves the overall reliability of automated drilling operations.
A patented semi-automatic drill bit changer addresses one of the key limiting factors of drilling productivity: manual bit changes in front of the rig. The concept includes limited automatic controls and a changer with a rack for 12 or 18 standard bits plus two reaming bits located underneath both feed rails. Worn bits are simply inserted into the rack for uncoupling and replacement with a new one.
“In addition to the productivity increase, this is also a huge safety improvement,” Välivaara says. “The bit changer not only reduces the risk of ankle and knee injuries by cutting back the times the operator needs to exit and re-enter the cabin, but it also effectively limits the overall time the operator needs to spend at the face changing the bits manually.”
The third key part of the upgrade is teleremote drilling control that enables uninterrupted productivity as well as improved safety and reliability through supervision and operation of the drill from a remote location. The system allows the operator to help the unit drill more holes, particularly at the profile, without taking excessive risks of wall collisions. It can also reduce the time the operator spends at the heading, improving the overall safety of underground development, particularly in geotechnically challenging mine areas.
“The great thing is that each of these new automation capabilities can also be selected as a stand-alone solution or in any combination,” Välivaara says. “If there is no need for remote control in a specific mine, for example, the mine can still choose to adopt the bit changer to improve the health and safety of its operators.”
