Tag Archives: Green Mining

SSAB, LKAB and Vattenfall plot HYBRIT pilot production pathway

Environmental, Metallurgy, Power supply for mines, Steel and iron ore, Sustainable mining, , , , , , , , , , ,

SSAB, LKAB and Vattenfall are taking another important step in their fossil-free steelmaking journey with preparations now underway for the construction of a demonstration plant on an industrial scale for its HYBRIT initiative.

The companies have also started consultations for deciding on placement of this demo plant in Norrbotten, Sweden.

The objective of the joint venture HYBRIT project is to develop the world’s first fossil-free, ore-based steelmaking process. The by-product of using fossil-free electricity and hydrogen in steelmaking, instead of coke and coal, will be water, instead of carbon dioxide. The partners believe the initiative has the potential to reduce Sweden’s total carbon dioxide emissions by 10%, hence the reason the Swedish Energy Agency has granted financial support for the project.

The plan is for construction of the demonstration plant to start in 2023, with the goal of taking the plant into operation in 2025.

“The intention is to be able to demonstrate full-scale production with a capacity of just over 1 Mt/y of iron per year, ie 20% of LKAB’s total processing capacity at Malmberget and almost half of the production capacity of SSAB’s blast furnace in Luleå,” the company said. “The goal is to be first in the world to produce fossil-free steel as early as 2026.”

HYBRIT is now starting an investigation into the selection of a location for the demonstration plant. Parallel consultations are being launched at two sites in Sweden: the Vitåfors industrial estate in Gällivare Municipality, where LKAB has mining operations, and the Svartön industrial estate in Luleå, where facilities including SSAB’s steel mill and LKAB’s ore port are located.

“The purpose is to consult and conduct an open dialogue about the location and design of the plant ahead of the upcoming selection of the site and permit application,” the companies said. “Consultation with government agencies, organisations and the public will begin in June and conclude in September 2020.”

The choice of location will have a major impact on future competitiveness and climate benefits, according to the partners, with investment decisions made once the authorisation procedure and other investigations have been completed.

HYBRIT’s pilot phase will run in parallel with the demonstration phase. In Luleå, the pilot plant for fossil-free steel will be fully constructed during the summer, and preparations are also under way to initiate construction of a temporary hydrogen store to test the technology for storing hydrogen in caverns, the partners said.

Martin Pei, Chief Technical Officer at SSAB and Chairman of HYBRIT, said: “We want to build the plant in Norrbotten. There’s good access to fossil-free electricity and competence here, as well as close collaboration with academia and the community. A demonstration plant for fossil-free iron production would also be positive for growth and jobs in the region, as well as contributing to a major climate benefit.”

Markus Petäjäniemi, Senior Vice President Market and Technology at LKAB, said HYBRIT is an important piece of the “jigsaw puzzle” in a green transition, in which we want to “climate-optimise” the whole chain from mine to finished steel by the year 2045.

“We want Norrbotten to be a world-leading arena for innovation and a centre of knowledge for the global mining and minerals sector,” he added.

Ore sorting has role to play in ‘Green Mining’ developments, TOMRA says

Bulk handling, Comminution of minerals, Mineral processing, Mining equipment, Sustainable mining, Water management, , , , , , ,

TOMRA says its advanced sensor-based sorting technologies can provide mining operations with the energy efficiency and ore recovery benefits they require to reduce their environmental footprints.

The ability to recover valuable ore from even sub-economic deposits or dumps has become increasingly relevant as the energy-intensive mining industry shifts towards a ‘Green Mining’ approach, according to the company.

Tord Svensson, TOMRA’s Head of Sorting Mining, explains: “For a mining company to become more sustainable and profitable, it requires a shift in focus that places more value on potentially limited commodities like water and ore.

“To achieve an environmentally-focused and efficiency-oriented production process – which is integral to Green Mining – it is necessary to implement solutions right from the beginning of the process. This is where ore sorting equipment comes in: using these technologies in the early stages of mining reduces waste material and shrinks the carbon footprint, while increasing profitability.”

TOMRA is a pioneer of sensor-based sorting technologies, offering smart technologies for sorting and separating a variety of valuable substances. Its solutions range from industrial mineral processes to sorting gemstones, ferrous and non-ferrous metals, coal and other fuels and slag metal.

The sensor-based sorting technology not only significantly reduces the amount of energy and water required, compared with more traditional methods such as grinding and dense media separation, but also maximises the efficiency and quality recovery of valuable ores, according to TOMRA.

X-ray transmission (XRT), one of TOMRA’s leading solutions, separates dry material of various ore and minerals based on their atomic density, irrespective of surface properties and thickness. This means it is not necessary to crush or grind every rock into smaller particles, which results in massive savings of energy, water, and their related costs, according to the company.

“Considering that grinding is the most energy-intensive part of the production cycle, as an estimated 50-75% of the energy used in mining is for the liberation and comminution of ore and minerals, this technology can have a significant impact on the sustainability and profitability of a mining operation,” TOMRA said.

Pre-concentration techniques like sensor-based sorting are proven to reduce energy consumption by about half, resulting in a considerable reduction of the CO2 footprint and providing a highly cost-effective solution, the company added.

TOMRA has created a Green Counter on its website that displays the total amount of CO2 reduced through the use of its sorting machines in real time. It uses the smart technology within the equipment, which records the amount of rock sorted and eliminated, as well as throughput and total hours of operation.

“With this data, TOMRA and mining companies are able to calculate the energy in kWh saved by not treating the waste which has been removed by the sorters,” the company said. “The amount of energy saved is converted into CO2 equivalents, which in turn are converted into CO2 metric tonnes.”

Through the use of TOMRA sorting machines, client companies have saved 123,696 t of CO2 in 2018 alone, the company said.

The company concluded: “TOMRA’s sorting solutions have proven to be more than just technological innovation – they are also considered the benchmark for industry standards in both efficiency and sustainability. TOMRA remains committed to evolving its technology with a clear focus towards preserving our shared natural resources.”