Tag Archives: Henning Knapp

Weir Minerals gives its skew view on HPGRs

With industry demand for high pressure grinding rolls (HPGR) on the up, Weir Minerals is arguing that skewing is a vital feature for modern HPGRs to reduce wear, save downstream energy and ensure optimal grinding across the whole feed.

The company was sharing its findings following the publication of a new white paper.

Weir said: “With their excellent throughput capacity, low maintenance requirements and energy efficiency, HPGRs are fast becoming a go-to for greenfield projects looking to maintain their margins despite commodity price pressures and declining ore grades.”

The mineral processing company said, in the June quarter, that it had registered strong demand for its Enduron® HPGR technology during the three-month period, later on in the year confirming a major order, which included this comminution equipment, from Fortescue Metals Group for its Iron Bridge magnetite project in Western Australia.

Henning Knapp, HPGR Process Team Leader for Weir Minerals, said the applications from this equipment have evolved from the cement production days of the 1980s and are increasingly being deployed as tertiary and quaternary crushers in mineral comminution circuits, dealing with tougher ores including iron, gold, copper and diamonds.

“As any engineer will tell you, it’s almost impossible to eliminate feed variance and segregation completely. In the past, this has posed a critical challenge for HPGR operators – but dynamic skewing such as that featured in the Enduron HPGR, maintains optimal pressure across the entire feed.”

Traditionally, HPGR manufacturers have shied away from skewing designs, for fear of roller misalignment creating unfavourable load distributions, and preventing the use of flanged guards to reduce the edge effect, the company said. “However, Weir Minerals’ unique roller bearings design allows for skewing alongside effective edge guards, reducing wear and promoting better grinding.”

The downside of static rollers

A HPGR reduces particles by compressing and crushing the feed between two equally sized, parallel rollers rotating in opposite directions, with a small gap between them. This compresses the feed to 80% of its solid density, where the force of the rollers pushes the rocks against each other and exceeds their compressive strength.

“Inter-particle comminution avoids the direct component wear caused by conventional comminution techniques, and applies immense pressure, up to 27,000 kN, across the entire particle size distribution, which creates the higher proportion of fines HPGRs are renowned for,” says Knapp.

However, segregated feeds can result in markedly uneven particle sizes across the width of the feed, creating high, abrasive pressure on one side of the roll and insufficient pressure on the other. It will also produce a coarser product, requiring more work downstream, according to Weir.

“To compensate for the edge effect, a lateral wall or ‘cheek plate’ is deployed on either side to prevent material exiting the gap between the rollers sideways. The closer this is to the rollers, the better – but that has prevented engineers from introducing the flexibility needed to cope with feed segregation,” explains Knapp.

How Enduron HPGRs skew to maintain optimum pressure

To accommodate this uneven pressure Enduron HPGRs use a spring-loaded lateral wall which not only reduces the edge effect (maintaining a gap of as little as 1 mm) but is specifically designed to facilitate roll skew.

As shown above, an uneven feed will lead to high pressure on one side and not enough on the other. Having one roller skew will facilitate larger material at one end while ensuring the smaller particles on the other side receive enough pressure to be ground down: it maintains an even pressure distribution across the entire feed, saving energy and reducing wear, Weir says.

“The degree to which the Enduron HPGRs skew is largely dependent on the width of the roll, with longer rolls skewing about 5 mm for every metre the roll is wide. However, the effect of even small changes can be significant on local pressure peaks,” says Knapp.

“The skewing should be managed by an advanced control system, which steers the rolls to satisfy the desired output pressure. This system also ensures the skew isn’t too great or maintained for too long, which both disrupt the compressive bed.”

In the case of prolonged or excessive skewing, Enduron HPGRs send a signal notifying the supervising control system and operating staff. Prolonged skewing generally is indicative of a disturbance or fault in up-stream facilities, such as low bunker filling, upstream crusher wear, screen deck wear, or conveyor failure, Weir says.

“Where static rolls suffer from differential pressure, creating undesired product, consuming more energy and suffering additional wear, Enduron HPGRs maintain optimum pressure across the entire feed thanks to their skewing, spring-loaded lateral walls,” Weir said.

Knapp concluded: “When dealing with competent mineral feeds in real-world conditions, there’s simply no substitute for the Enduron HPGR’s ability to maximise performance with skewing.”