Tag Archives: iSURE

Sandvik to unveil new battery-powered bolter, simulator and app at MINExpo

Automation, Communications in mining, Environmental, Equipment maintenance, IoT, Mining equipment, Mining events, Mining safety, Mining services, Mining software, Power supply for mines, Sustainable mining, , , , , , , , , , ,

Sandvik Mining and Rock Solutions is set to unveil three new underground drilling solutions at MINExpo 2021 in Las Vegas, based around a common theme of electrification, sustainability and digitalisation.

The new products to be unveiled at the show, taking place from September 13-15, include a new battery-powered bolting rig, an accompanying portable training simulator and a new mobile application for enhanced drilling.

The new Sandvik DS412iE (pictured) is a highly automated, productive, battery-electric powered rock bolter for underground mining and tunnelling applications. It is equipped with an electric driveline system and battery package with electric motor for zero emissions while tramming and drilling, thereby reducing thermal load and underground ventilation requirements, Sandvik says.

The rig’s iSeries platform offers various levels of automation for rock support drilling as well as providing component commonality through the 400i drill range. The introduction of Sandvik DS412iE rounds out Sandvik’s first range of battery-electric vehicles for all underground drilling applications, according to the company.

Sandvik Digital Driller™ training simulators provide a compact and flexible solution to safely train underground drill rig operators or maintenance teams, the company says. The latest Digital Driller module is specifically designed to support the new Sandvik DS412iE battery-electric rig, with the new version retaining the key features of being low weight and highly portable, enabling it to be used where it is most needed – on site.

Use of the simulator is estimated to increase annual productivity by 5% due to increased rig availability alone, Sandvik claims. In addition, training costs are reduced by up to 35% through less energy and consumables costs and reduced rig damage.

The new Sandvik DrillConnect mobile application transfers drilling plans – including those created in iSURE® – drilling reports and MySandvik machine data in environments where network coverage is inadequate or not available. Sandvik DrillConnect removes paper-based processes and automates the data transfer between the office and drill rig via a customer’s preferred mobile device. The app also provides easy access to the machine’s troubleshooting and manuals and is designed to be scalable for future development, according to Sandvik. The first version will be compatible with iOS devices, with plans to introduce Android compatibility in future iterations.

Patrick Murphy, President of Underground Drilling at Sandvik Mining and Rock Solutions, said: “Our latest developments are based on the feedback we have received from customers. We have listened to their challenges and are developing solutions that ensure we will continue to lead the industry shift toward a more digitalised and electrified future.”

In addition to the new underground drilling solutions being introduced at MINExpo, a Sandvik DL432i tele-remote operator chair will be on display. Sandvik will also showcase the latest updates to its underground drilling product offering.

Sandvik to add rock bolter to battery-powered mining line up

Automation, IoT, Mining equipment, Mining services, Power supply for mines, Sustainable mining, , , , , , , , , , , , ,

Sandvik Mining and Rock Technology plans to launch its first and one of the the mining industry’s first battery-powered rock bolters next year, as it continues to roll out new solutions to electrify the underground mining space.

The Sandvik DS412iE extends the zero emissions concept to the underground rock bolter class and opens a wide range of possibilities for mines driven to boost their productivity and safety with data-based analytics, according to the company.

In its core mission of delivering productive, secure and versatile rock support solutions, Sandvik rock bolters have a clear track record, according to the company.

“Still, these tools’ automation and data acquisition capabilities have not been as advanced as their production and development drill rig counterparts,” the company said. “Scheduled for launch during 2021, the new Sandvik DS412iE rock bolter will complement the intelligent family of next-generation battery-powered underground drill rigs.”

Anssi Kouhia, Product Manager, Rock Support Drills, said the DS412iE is basically an upgrade on its existing Sandvik DS411.

“We have received positive feedback about that model,” Kouhia said. “We made an accomplished model even better with more advanced automation capabilities, improved data acquisition and upgraded ergonomics.”

Like the battery-powered DD422iE  jumbo drill, the rig trams on battery and carries out drilling and bolting when connected to the mains power.

Along with its direct predecessor, the new intelligent bolter also has much in common with the larger Sandvik DS512i in the 5 x 5 m drift size. One example is their similar versatility in terms of bolting systems: Sandvik DS512i and Sandvik DS412iE can handle a wide range of bolt types and lengths, including a combination of automatic cement mixer and automatic resin injection on the same bolter.

The new Sandvik DS412iE will effectively complete Sandvik Mining and Rock Technology’s rock support drill range for the 4 x 4 m class, updating its entire product range to the latest i-standard of connectivity and automation capabilities, the company said. Additionally, the Sandvik DS412iE will be the supplier’s first battery-powered rock bolter.

“In other words, the zero underground emissions approach will now include all stages of the underground mining process: rock support drilling as well as development and production drilling and loading and hauling,” Sandvik said. “The ability to virtually eliminate underground particulate matter, NOx, CO2 and heat emissions is first and foremost a major health and safety benefit, but also offers cost savings by reducing mine ventilation power requirements.”

The new rig responds to major industry trends that customers have identified in feedback sessions, Sandvik said.

In addition to reducing underground emissions and improving working conditions, the safety and environmental improvements also make economic sense by reducing time lost to injuries and costs. The advanced automation capabilities will increase the speed and safety of the bolting cycles as well as open a range of possibilities for process optimisation, the OEM said. “This will translate into more reliable rock supporting and safer working environments.”

Like one-hole automation that has been a standard feature in Sandvik mining and tunnelling jumbos, the one-bolt automation feature of Sandvik DS412iE now extends this capability to rock bolters, Sandvik said.

“The rig can carry out a single bolting cycle unassisted, so that in optimal conditions the operator only needs to manually relocate the boom from one bolt location to another,” the company said.

The battery-powered unit will come with two automation levels: the standard Silver package from the outset and, in the near future, the optional extended Gold level. The main difference between the two packages is in the remote monitoring and operating capabilities and in the measurement-while-drilling functionality.

The automation packages seamlessly mesh with Sandvik iSure software, according to the company. Available as a standard tool for designing drift drilling plans and blasting plans, iSure now increasingly extends to bolting operations and comes in three levels: iSure Basic and iSure Plus for the standard Silver automation package, and iSure Premium for the optional Gold level automation. The advanced automation solutions can offer a significant productivity and quality boost, Sandvik said.

“With iSure, you can design a bolting pattern in the office, transfer it to the rig over Wi-Fi or on a USB flash drive, carry out the bolting according to the pattern, and, on top of that, you can retrieve a report that compares the plan and the realised bolting pattern,” Kouhia says.

iSure compatibility, in particular, enables more extensive data acquisition and reporting, Sandvik said.

In addition to the bolting pattern, the retrieved data will also include various parameters that characterise the quality of the bolting process, such as grouting concrete consumption and bolt tightening torques. This can serve to document the bolting process in much greater detail than it did previously, which enables more accurate quality control of the rock supporting measures.

The verifiable track record of the rock support measures taken provides systematic safety documentation and, should a failure still occur, the bolting process reports can help to determine the cause of it, down to the level of an individual bolt – when it was installed, how it was installed and whether it complied with set specifications.

Full compatibility with the My Sandvik fleet management portal and the OptiMine suite of digital mine automation and analytics solutions further enhances the connectivity of Sandvik DS412iE, providing all-round data-based control for rock support operations, the company said.

While the main areas of focus for Sandvik DS412iE surround automation, connectivity and data acquisition capabilities, productivity has not been neglected, Sandvik said.

The new boom control system, advanced boom manipulator mode and optimised bolting head movements help the operator to achieve a smooth and efficient process by keeping the bolting head automatically aligned with the correct bolt fan positions and angles, the company explained.

In terms of sheer mechanical power, much of the new bolter’s high productivity derives from the new control system of the Sandvik RD314 rock drill, which substantially increases the output and penetration rate. Overall, the productivity upgrade is roughly 25% from previous models, according to Sandvik.

The Sandvik DS412iE includes many safety and ergonomic features.

The bolter is designed to be compliant with the EN16228 standard for drilling and foundation equipment, which is harmonised with the requirements of the European Machinery Directive. One of the EN16228 requirements is an access detection system (ADS). In the Sandvik DS412iE, the ADS automatically scans the surroundings of the bolter and alerts the operator should a person enter the work area, which effectively reduces potential accidents. The safety improvements also include a fully covered steel strand reel.

The Sandvik DS412iE continues the bolter class’ legacy of secure and effective cabin design, Sandvik says, with a 55% percent improvement in visibility, better effective vibration control and significant noise reduction adding up to a safer and more comfortable workplace for the operator.

Future launches will also include a diesel-powered version, Sandvik DS412i, which will be compliant with the latest engine emission specifications, Sanvik said.

This is an edited version of a story that first appeared on Sandvik’s Solid Ground platform here.

Sandvik ups the drilling ante with DT1132i jumbo

Equipment maintenance, Explosives and blasting, Mining equipment, Mining services, , , , , , , , , ,

Sandvik Mining and Rock Technology has launched a new underground jumbo that, it says, is purpose-designed for fast and accurate drilling in tunnelling and cavern excavation.

The Sandvik DT1132i jumbo is the latest addition to Sandvik’s already extensive range of underground drill rigs. Together with the new high frequency rock drill Sandvik RD535 and rock tools designed for high speed drilling, it provides users with a heavy duty solution for their underground drilling needs, according to the company.

“All Sandvik DTi tunnelling jumbos have been developed with a special modular design that makes them highly flexible and versatile,” Sandvik says. “Suitable for fast face drilling or mechanised long-hole drilling and bolting, they are proving be highly productive, reliable and effective across the world.”

These rigs also use the latest developments in automated drilling solutions such as the iSURE® tunnel management software and SICA intelligent control system.

The new machine is a three-boom, electro-hydraulic jumbo. The computer-controlled rig can use both operator-controlled boom positioning and full-face automatic drilling functions, and also incorporates some of Sandvik’s latest developments in digital solutions. It comes equipped with Sandvik’s new high frequency RD535 rock drill, robust booms and advanced drill string guides, “making it a complete and new high-speed drilling solution”, Sandvik says.

New features

The RD535 rock drill automated drilling features and new rock tools mean that that the DT1132i delivers the results required, but with 40% less exhaust particles, up to 20% higher penetration rate and with 25% more side coverage (3 x SB160i 190m2 -19,400m x 12,200m), Sandvik says.

The premise behind the development of the new DT1132i is to provide users with increased drilling performance and accuracy, thanks to its fast and adaptive drilling control capabilities, able to account for changing rock conditions. The rig design also maximises operator safety and ergonomics, with improved fleet standardisation (high parts commonality) enabling extended rig usage across different work sites.

Among the new features on the new rig is a 3 m telescopic TB160i boom, optimised with a front wrist structure that provides 1 m additional side coverage as standard, and 4 m side coverage with telescopic adjustment. The new boom also uses a new fully proportional boom control for accurate and fast manual boom handling, with intelligent compensation models to give accuracy in all operating conditions, according to Sandvik.

The rig also comes with an ergonomic vibration-dampened cabin, providing the operator with excellent all-round visibility, low noise level inside the cab – thanks to its acoustic windows – a filtration system to minimise dust inside the cab (according to standard EU6/7) and an open and spacious operator environment.

To further boost the efficiency of the rig and the operator, diagnostics information is integrated into one display. These include drilling diagnostics for boom instrumentation, drilling control system and shank lubrication, together with carrier diagnostics for electric motors, pumps (hydraulics and water), transmission system, diesel engines, brake system, jacks and cable reels.

Power and efficiency

The new RD535 rock drill has maximised power transfer capabilities leading to a high drilling speed without compromising hole quality, Sandvik says. It has an efficient and powerful patented percussion mechanism, as well as a tool-saving, efficient and patented stabiliser structure for increased reliability. These features, together with improved flushing and efficient cooling, provide uninterrupted high-speed drilling.

The DT1132i possesses a powerful transmission system with a Cummins B6.7, 168 kW diesel engine (Stage V) which can be operated up to 5,000 m above sea level without any modifications. The new engine provides up to a 90% reduction in NOx emissions (compared with stage III engines), with more than 90% mass reduction for diesel particulate monitoring. The rig uses a new carrier that has more efficient hydraulic and water systems – including separate circuits for both drilling and tramming hydraulics, proportional flushing valves to adjust the flushing flow and inlet/outlet pressure monitoring.

The rig steers by hydraulic rear wheel steering and its electric current reducer unit provides electric reactive power element from an on-board capacitor, reducing electric current draw by up to 20%. The 3 x 90 kW IE3 electric motors require 2.5% less energy, with all working lights based on LED technology, automatically controlled based on tramming direction and with directional lights available where needed, Sandvik says.

A new feed – TF535i – also provides increased feed force for high power drilling, while a saving hose reel structure gives longer service life for the hoses which are of an increased size.

Automated drilling

The DT1132i is available with some of the latest developments in automation, including a SICA control system for intelligent torque control/feed percussion, with monitoring and fleet management for My Sandvik. To further improve the excavation process, remote access via WLAN can be chosen to allow web-based data transfer as well as online measurement while drilling.

As ‘Gold’ standard, the DT1132i comes with torque based semi-automated drilling, manual boom control and rod handling, all enabling drilling to a predefined depth with feed angle measurement and drill bit location measurement. Drill plan visualisation and rig navigation are also included. In addition to these standard features, the rig is also available as part of the ‘Platinum’ package with automatic long hole drilling and fully automatic face drilling.

New drilling tools

For face drilling, the DT1132i comes with the new Sandvik Alpha 360 drilling system for the RD535 rock drill. This has features such as an optimised rod diameter with increased flushing hole size, increased flushing and higher penetration rates, as well as a new Sandvik Alpha 360 connection. The latter possesses a new larger bit thread for increased drilling power and straighter holes which gives higher advance rate per blast. For grouting, the GT38 system provides 50% less deviation and increased service life.