Tag Archives: Kevin MacNeill

Australia’s AMGC accelerating muon detection, hyperspectral imaging mining work

Base metals, Energy minerals, Environmental, Mine operation news, Mineral project development, Mining services, Precious metals, Sustainable mining, , , , , , , , , , , , , ,

Cosmic rays and hyperspectral imaging are central features in two mining technology projects backed by the Advanced Manufacturing Growth Centre, with major implications for safety and access to strategically important materials, the centre says.

mDetect is a Swinburne University (Melbourne, Australia) spinout specialising in astrophysics research into muons, a type of subatomic particle that results from the Earth’s atmosphere being hit by cosmic rays. They are sometimes described as the heavy cousin of electrons, with their mass helping them pass deep into objects; much further, for example, than ground penetrating radar.

The company has commercialised telescopic devices and software in a system that uses muon behaviour to monitor and map tailings dams, providing real-time information on stability of the critical infrastructure in mining operations.

Assisted by A$248,191 ($161,354) in co-funding from AMGC’s Commercialisation Fund, mDetect has trialled its muography-based imaging system at OZ Minerals (now part of BHP) operations, and leveraged key partner Swinburne to assist with development, documentation, design for manufacture, production automation and other input ahead of scale manufacture. Back in 2021, the AMGC said OZ Minerals was expected to trial this at Carrapateena in South Australia.

Co-founder of mDetect, Dr Jerome Donovan, said: “Thanks to AMGC, we’ve gone from idea to impact, developing our product for commercial sales, securing key agreements and developing our design for scaling manufacturing – it has by far been our best government-funded program experience. With high-profile partnerships secured, mDetect is set to revolutionise global industries and enhance mining safety.

“Taking highly-technical IP – and which has heritage in dark matter research, no less – and delivering a market-ready product is never easy. But we are very nearly there thanks to the support from AMGC.”

The project is expected to lead to A$7.7 million in revenues in the fifth year after completion and has already resulted in new jobs at the growing company, according to the centre.

AMGC Managing Director, Dr Jens Goennemann, added: “An Australian manufacturer harnesses the power of space to protect lives on Earth. That’s Australian manufacturing at its best – globally relevant, collaborative and highly complex. mDetect is truly a leader in their field, poised to make a global impact.”

From using space particles to leveraging electromagnetic imaging, EQ Resources, the owner of the formerly dormant Mount Carbine tungsten mine in north Queensland, has devised a method to identify and extract tungsten from waste sources, following its discovery at the site in the year 1895.

AMGC supported EQ Resources through A$600,000 in co-investment to support a project to recover tungsten from a mine waste stockpile and low-grade deposits, incorporating hyperspectral imaging sensors on a wheel loader, artificial intelligence-assisted decision making, and X-ray sorting technology.

The project linked EQR with Mt Carbine Quarrying Operations, Plotlogic, TOMRA, Cronimet and the University of Queensland. It has helped deliver an additional A$3.6 million in revenues since completion of the project, according to the centre.

Photography for EQ Resorces at Mt Carbine Operations, 21 Sep 2022.

Kevin MacNeill, CEO of EQ Resources, said, “Early co-investment form AMGC allowed EQ Resources to accelerate the commercial development of our technology, furthermore it gave us the credibility to apply for follow-on programs and secure a A$6 million grant from the Critical Minerals Accelerator Initiative to move from pilot to operational scale.

“EQ Resources’ hyperspectral imaging technology demonstrates that there is still significant life in historical mines where waste piles are mountains of opportunity – in this case 130-year-old piles of tungsten containing waste.”

Goennemann said: “In taking a step back two centuries ago and looking at the resources we already have a hand, EQ Resources will be able to extract greater value from resources long-thought unusable both here in Australia and abroad.”

TOMRA XRT ore sorters providing Mt Carbine with tungsten upgrade, circular economy advantages

Comminution of minerals, Energy minerals, Mine operation news, Mineral processing, Mining equipment, Sustainable mining, Water management, , , , , , , , , , ,

TOMRA X-Ray Transmission (XRT) sorters are providing a game-changing solution for the EQ Resources-owned Mt Carbine mine in Queensland, Australia, reducing costs and achieving high-purity tungsten ore for follow-on processing while contributing to a circular economy by producing green aggregates for sale, the ore sorting company says.

The Mt Carbine mine, northwest of Cairns, Queensland, was acquired by EQ Resources in 2019. The company entered a joint venture with Cronimet Group to set up tungsten extraction from the mine’s large waste dump and tailings. It is also planning to operate the open pit and underground mine, of which it has full ownership.

EQ Resources management has a long-standing relationship with TOMRA, having used its sorters with success on a variety of projects since 2011, TOMRA says. Based on this experience, the company turned to TOMRA once again for the Mt Carbine mine, with test work conducted at TOMRA’s Test Center in Wedel, Germany, confirming its XRT technology would provide the solution for the project.

“We were confident it would work, but we sent a small sample for testing to make sure,” Kevin MacNeill, CEO of Mt Carbine mine, EQ Resources, said. “The advantage of TOMRA’s sorters compared to others is in the image resolution: it is able to resolve the finer inclusions in the tungsten. This high resolution gives us better recovery and more control over the sorting process.”

Mt Carbine is currently mining the 12 Mt of low-grade historical stockpiles. The ore is crushed and screened at 6 mm and 40 mm. Two TOMRA XRT sorters are used to pre-concentrate the feed in the 6-40-mm-size range before processing in the wet plant. Approximately 10% of the sorters’ feed mass is ejected as product with a recovery of tungsten of well over 90%. This means only 10% of the mass is processed in the wet plant, dramatically cutting running costs, reducing the required size of the wet plant, as well as saving water and energy, TOMRA says.

“We let the technology do the work for us and take out all the rubbish and we’re left with just the pure tungsten to send to the processing plant – and we do that very cheaply using the sorters,” MacNeill says. “One of the best things about the TOMRA XRT is the cost savings to the operation. It costs approximately A$1.5/t ($1.02/t) to sort and then it costs A$14/t for wet processing: as we take out 90% of the sortable fraction mass, we only have to process 10% of the higher grade concentrate and natural -6 mm material while maintaining recovery, so our cost benefit is obvious.

“We couldn’t afford to run this waste dump if we had to crush everything to 6mm and process it through the wet plant, it would be too low grade and costly.”

EQ Resources is also taking advantage of the TOMRA XRT sorters to create an additional revenue stream from the waste material.

MacNeil explained: “Normally you would grind the waste down to 6 mm and put it through the jigs, but, by putting it through the TOMRA sorters, we are able to keep a whole range of aggregates on the coarser size fractions. The sorters remove any material containing acid-forming sulphides and the waste rock that comes out is incredibly clean. We are, therefore, able to use it in making all kinds of different quarry products – from road bases to concrete aggregates. It’s a perfect example of a circular economy.”

“Selling these green aggregates adds a significant portion to our business – about A$5 million a year – and that’s all because of the TOMRA sorters. In fact, we’ve probably paid for each machine from this revenue five times over.”

The TOMRA XRT sorters are delivering both environmental and business benefits to the Mt Carbine operation, to the satisfaction of MacNeill: “They’re dry, they create no water usage, they require very little power compared to what we use in the processing plant, so it’s a real advantage to us to have these, and we’re looking at purchasing a third one in the near future.

“From an environmental point of view, I think the TOMRA sorters will play a huge role in the future because of their capability of removing sulphides. If you remove sulphide before stockpiling waste rock, you will have the benefit of no acid creation and drainage – and it would reduce your footprint in your closure plans.”

EQ Resources enlists help of Golding for Mt Carbine tungsten development

Mineral project development, Mining services, Steel and iron ore, , , , , , , , ,

EQ Resources Limited says it has executed an Early Engagement Contract with Golding Contractors Pty Ltd for the restart of the open-pit mining operations at the Mt Carbine Tungsten Mine, in Queensland, Australia.

EQR said it selected Golding, a subsidiary of NRW Holdings, as its preferred partner after working through a high-quality engagement and approval process.

“Early engagement was a preferred course for EQR as recent capital investment into the Mt Carbine processing plant is commissioning well and the company is receiving positive feedback from offtake partners for supply of our critical mineral product,” EQR’s Chief Executive Officer, Kevin MacNeill, said.

“EQR wants to deliver the highest quality outcome for the life of the Mt Carbine Mine for all stakeholders. Golding has strong credentials including specialist mine site rehabilitation works and environmental earthworks.

“Mt Carbine is ramping up treatment of its substantial low-grade surface resource as part of its joint venture with Cronimet with the next step in the development plan being the restart of its 100%-owned operations starting with the Andy White open pit, subject to the planned permit amendment. It’s a natural progression.”

Over the coming months, key areas of engagement and focus to finalise the mining contract and ensure smooth transition to mining operations will include:

  • Pit design: EQR is set to revise pit design in line with the recent drilling with Golding to maximise the strategic resource benefit and value for all stakeholders;
  • Equipment selection: In conjunction with the pit design under the contract, EQR and Golding will target strategic equipment selection to further optimise mining costs;
  • Contractor engagement: Golding will help manage the open-pit development through their in-house resources and network of preferred contractors to ensure compliance with Queensland mining legislation;
  • Stakeholder engagement: EQR and Golding will jointly engage local and strategic stakeholders regarding camp establishment, workshop establishment, personnel engagement, strategic regional suppliers and manufacturers; and
  • Timing: the open pit operations are forecast to begin during the first quarter of 2023.

EQ Resources, as a result of the acquisition of Mt Carbine Quarries in June 2019, now has 100% ownership of the two mining leases and surrounding exploration projects at the project. In a joint venture with Cronimet, the tungsten processing plant has been refurbished, commissioned and expanded to 300,000 t/y capacity.

The company is in the process of completing the required environmental amendments to allow the operation to process 300,000 t/y and eventually 1 Mt/y. Once the bulk test work is completed, a feasibility study will be completed for the design of the 1 Mt/y operation.