Martin Engineering has launched what it says is the next generation of tracking technology for a global marketplace with its Martin® Tracker™ HD (heavy-duty) belt conveyor alignment system.
This system comes with widely available plate steel to increase availability and affordability across all six continents the company serves.
A mistracking belt produces excessive spillage, which increases labour costs for clean-up and may cause contact with the mainframe. This damages both the belt and the structure and increases the potential for a friction fire, according to the company. The Martin Tracker HD upper and lower units provide immediate, continuous and precise adjustment of the mistracking belt. The result is greater productivity with less unscheduled downtime from both equipment replacement and spillage cleanup for a lower cost of operation, Martin Engineering says.
“Since most OEM mistracking devices are only designed to prevent contact with the stringer and don’t actually realign the belt, operators can spend a lot of time monitoring the system and adjusting idlers to achieve consistent alignment,” Dave Mueller, Product Manager for Martin Engineering, said. “With enough manual adjusting, operators find that idlers must be recentred if there’s a change in cargo characteristics or to install a new belt. The Tracker HD automates the alignment process, eliminating the need for constant monitoring and manual adjustments, reducing the labor and downtime for maintenance.”
The Martin Tracker HD’s precision comes from sensing rollers that ride either side of the belt edge and are attached to the end of an arm assembly. As the rollers detect slight variations in the belt path, the force of the wandering belt causes the arms to automatically position a pivoting idler in the opposite direction of the misalignment. The lever action requires less force to initiate the correction and only slight adjustments mean the consistent contact between the belt and idlers reduces the energy needed to bring the belt back into alignment, the company explains.
“Certain countries can’t buy the square tubing, so we’re now manufacturing the equipment from readily-available plate steel without any changes to the performance or life of the unit,” Mueller said. “This allows the Tracker HD to be produced and supplied across all global business units.”
Easy to install and designed to withstand the stress associated with wider, thicker belts moving at higher speeds and carrying heavier loads, the Martin Tracker HD is suitable for a belt thickness up to 28.5 mm and speeds up to 4 m/s. Both the upper and lower units accommodate belt widths of 915-1,828 mm with an effective tracking distance of 45.72 m.
Available in 20°, 35° and 45° trough angles, there are options for the addition of a Martin Trac-Mount™ Idler, which allows the entire troughed idler unit to be slid away from the mainframe and safely serviced from outside of the system by a single worker, the company says. This safety element can considerably reduce the amount of labour and maintenance time for the replacement of broken or frozen idlers. Also available are rubber-lagged rollers on the lower tracker and a grease kit for both the upper and lower assemblies. The unit is not suitable for reversing conveyors, belts with substantial rollback, or paddle or chevron belts, Martin Engeering clarified.
It is recommended operators install Martin Tracker HDs after the load zone on belts wider than 610 mm with additional units placed down the system to keep the belt centred and tracking. By placing an upper unit before the discharge, operators ensure the belt is centred on the head pulley allowing for optimal belt cleaning with maximum cargo discharge.
The lower tracker has been redesigned to include an extra safety feature not found in competitor units, the company says. Regardless of the conveyor, return rollers have been known to detach and drop, creating a serious safety issue, so the Martin Tracker HD has been equipped with safety guarding on the steering roll to prevent the roller from coming off or putting workers in harm’s way. On the return, it is recommended to place a tracker after the discharge zone or take-up pulley, as well as periodically down the system depending on length. To ensure centred loading, the belt must enter the loading zone aligned, so installing a lower unit approximately five times the belt’s width in distance from the tail pulley will support an efficient loading process.
Since the basic design of the Martin Tracker HD is similar to that of its predecessors with square tube construction, the testing that has taken place focused on performance, durability and installation time. Tested in bulk handling operations including mining and cement where mistracking leading to spillage had historically been a concern, the unit performed up to Martin Engineering’s high standards, the company said.
“Martin Engineering believes safety should be a core function in any conveyor accessory we design, and the Tracker HD is no different,” Mueller said. “By automating consistent belt tracking, this solution reduces equipment wear, maintenance time and downtime. These factors lower the cost of operation offering the best return on investment of any tracker on the market.”