Tag Archives: mine explosives

Dyno Nobel initiates EZshot detonator launch

Mining consumables, Mining equipment, Mining safety, Mining services, , , ,

Dyno Nobel has launched the newest addition to its electronic initiation portfolio, the EZshot®.

This technology offers users the benefits of accurate electronic timing with the ease of use of the NONEL® shock tube, the company says.

“The EZshot detonator series is an exclusive design for underground perimeter blasting. This system gives the customer the ability to use electronic timing for improved perimeter control, helping them to save on time and overall production costs,” Dyno Nobel said.

“With the same J-Hook hookup as NONEL, no new training is required, allowing the customer to quickly move forward on all projects.”

The electronic detonator, EZshot LP, has a high-strength detonator in a heavy walled copper shell with an electronic circuit board timing chip providing precision and accuracy.

“The smart chip technology in the detonator delivers the timing needed that cannot be reached with tradition non-electric detonators,” the company said.

The electronic detonator comes in factory-programmed delay times, ranging from 1,100 to 8,000 milliseconds, with the long period delay timing ideal for underground perimeter blasting, it says.

The EZshot LP shock tube is identical to the trusted and familiar NONEL LP shock tube Dyno Nobel has been producing since the 1970s, in a new colour.

“This reliable design had stood the test of time and blasters will be familiar with the J-hook connection, virtually eliminating additional training time. EZshot LP takes advantage of the shock tube system allowing wireless communication from initiation to detonation,” the company said.

Mining3 making headway on Alternative Explosives project

Base metals, Coal technology, Energy minerals, Environmental, Gem stone mining, Industrial minerals, Mining consumables, Mining safety, Mining services, Precious metals, Steel and iron ore, , , , ,

Toxic fumes produced by detonating explosives in both surface and underground mining could become a thing of the past if Mining3’s Alternative Explosives project continues to present impressive results, the research organisation has said.

Over the past few years, research has been underway at Mining3 to deliver a hydrogen peroxide-based explosive that is a non-toxic and far safer and environmentally-friendly alternative to current blasting materials.

While the initial research confirmed ammonium nitrate-free explosives was a viable option, further investigation was required in fume monitoring, blasting capability, underground blasting applications, and alternative fuel formulations, Mining3 said.

A blasting chamber was installed at the Pinjarra Hills facility in Brisbane, Australia, to provide an on-site testing environment. Detonation monitoring confirmed the post-blast fumes from hydrogen peroxide-based explosives reduced exposure risk and delivered a significant reduction in toxic post-blast gases, the company said.

Comparisons of 100 g detonations between the hydrogen peroxide-based explosive and the bulk ammonium nitrate explosive (ANFO) revealed the latter was associated with a maximum of 50 ppm nitrogen dioxide (NO2) gases over 25 minutes, while the hydrogen peroxide-based explosive had no NO2 fume production.

“Success was also achieved in underground mining with trials conducted at the Sandvik mine facilities in Tampere, Finland, where Mining3 researchers conducted underground burn cut and fume monitoring trials.

“Tests in high density (circa-1.07 g.cc-1), hard volcanic rock revealed hydrogen peroxide-based explosives obtained the velocity of detonation values in the vicinity of 4.7 km.s-1 and performed similarly to an ammonium nitrate emulsion (ANE) product during comparative tests.

“Gas monitoring data also indicate that the hydrogen peroxide-based explosives produced less toxic carbon monoxide, post-blast fumes, than the ANE product. Further trials, optimisation, and loading improvements are anticipated to further enhance detonation performance and reduce re-entry time during operations,” Mining3 said.

In addition to the effective underground blasts, the production team proved international borders are not a barrier to the technology.

“Local materials were tested and confirmed to meet the requirements for the alternative explosive formulations. The oxidising component, hydrogen peroxide, is manufactured around the world in industrial volumes for several industries and is already used in some mining operations for ore processing.

“The use of hydrogen peroxide at a concentration of 50% has been utilised for explosives testing as it has a wide commercial availability. Whilst higher percentages of hydrogen peroxide have been utilised in the past for explosives, in the interest of a bulk explosive, a 50% w/w percentage solution has adequately performed in blast trials.”

The predominant fuel component, glycerol, likewise is available in commercial volumes and the sensitisation material, glass micro-balloons, required to enable detonation of a hydrogen peroxide-based explosive is readily obtained from several international companies.

The low percentages of the sensitisation material used to achieve the desired density of the hydrogen peroxide-based explosive are comparable to, or less than what is required for an ANE product. In all, the alternative explosive formulation can be optimised for global application.

Finally, the investigation of inexpensive, alternative fuels for the hydrogen peroxide-based explosive technology were identified thanks to a collaboration with Southern Oil. The aim was to replace the expensive glycerol fuel component with an inexpensive waste line from the oil refinery industry. The identification of refinery distillates as fuels have added stability, flexibility and cost reductions to the product.

It was this new alternative fuel-based formulation, designed by Dr Andrew Kettle, Mining3 Research Scientist, that was displayed at a National Explosive’s Forum in Helidon, Queensland, last month. At this event, the practical manufacture method was demonstrated which was followed by the detonation of 500 g of the hydrogen peroxide-based explosive product.

At the display, two prepared solutions – oxidiser and fuel phases – were combined and during mixing, activated to produce a hydrogel. The demonstration provided a chance for the mining industry to understand the denotation capability of this alternative fuel source which has maintained the product blast capability.

The next stages of the alternative explosives project include further applications in surface and underground mining and optimisation of formulations to meet the industry demands for commercial purposes.

Commercial partnerships with material suppliers and manufacturing unit producers are currently being negotiated, and multiple trial sites are scheduled to progress the operational integration of this product into the mining industry.