Tag Archives: MPS

Loadscan load volume scanner study highlights OPEX, revenue opportunities at Queensland gold mine

Loadscan says a recently released report focusing on the results from using a Loadscan load volume scanner at an underground gold mine in central Queensland, Australia, has reinforced the economic and environmental value of its solution.

The study, ‘UNDERGROUND MINING; Economic benefits of load volume scanning of underground mining trucks,’ was conducted over a seven-month period at the mine mine by Professor Peter Knights and Maximillian Reuter from the University of Queensland in Brisbane, Australia. The data gathered over that period indicated a significant incidence of carryback, excessive fuel consumption and under-utilisation of equipment, all of which contributed to unnecessary operating costs and considerable lost revenue, Loadscan says.

The Loadscan Load Volume Scanner (LVS) is designed primarily for the civil construction sector and uses eye-safe LiDAR laser scanning technology, combined with proprietary Loadscan software, to measure the exact volume of material in the bin of a truck. Loadscan’s Mine Payload Technologies division has further developed its Mine Payload Scanner (MPS) for mining applications using technology based on its LVS system.

In operation, empty haul trucks are driven below an elevated scan head to create a reference scan in the database and then, when loaded, are scanned during every pass from the mine, with those scans compared with the reference image to accurately measure the volume of the truck’s load.

Because trucks don’t need to come to a complete stop during the scanning process, the MPS system allows for a time saving over the use of traditional weigh bridges, reducing truck cycle times, while installation, operating and maintenance costs of an MPS are also considerably lower than in-situ weighing systems, according to the company.

Trucks are fitted with RFID tags for automatic recognition and tracking, which allows for detailed real-time reporting and data acquisition. The scan information returned can highlight underloading, overloading – negatively effecting revenue – or uneven loading, which can cause unnecessary stress and wear on truck components and substantially increase operating costs.

“One of the most important factors that the MPS can highlight is the incidence of carryback (or haulback), where material isn’t discharged from the bin during unloading and is carried back into the mine portal, reducing effective payload and having a considerable impact on productivity and, ultimately, revenue,” Loadscan says. “By identifying carryback, the material can be accounted for, deducted from shift tallies where necessary, and removed from the bin to ensure accuracy and improved payload capacity.”

Data for the study was gathered from four articulated haul trucks – three Epiroc MT6020 models with a rated capacity of 60 t, and a single Epiroc MT65 with a rated capacity of 65 t. More than 6,600 scanner readings were recorded over the four trucks during the seven-month period. Carryback was identified in more than 60% of the trucks’ haulage cycles and accounted for more than 980 cu.m of payload over the duration of the study, with an estimated revenue loss of A$370,000 ($243,969), according to Loadscan. In addition, figures were as high as almost 3,500 litres of additional fuel used hauling carryback over the study period, adding almost A$7,000 in estimated additional operating costs.

Loadscan Managing Director, Carey West, said: “Mining across the world is coming under a more intense focus to meet increased best practice requirements such as efficient use of equipment, reduced operating costs and a wide range of environmental issues, which is why metrics such as carryback, fuel consumption and loading efficiencies are so important.”

MPS data showed the average load volume for the 60 t-rated MT6020 trucks was just under 26.53 cu.m, which returned an average payload weight of slightly more than 48 t (based on an estimated bulk density of 1.82 t/cu.m). Isolated scans of the MT65 however, showed average volumes of less than 30 cu.m, equivalent to a payload of just under 54 t – considerably below its rated capacity of 65 t.

Conclusions from the report showed that the capacity of the MT65 could be considerably better used by increasing the average load. Estimations show an increase of just 10% in the average load would be valued at slightly under A$1 million per year, Loadscan said.

West added: “Inefficient loading cycles can have a huge impact on profitability. The MPS provides real-time data of every load with an accuracy of +/- 1% and, by identifying underloading, equipment can be better utilised and operators can be trained in more efficient loading practices.”

Overloading of trucks increases both cycle times and fuel consumption, reducing efficiencies and adding increased stress to machinery components, especially if trucks are loaded unevenly.

Potentially due to the presence of carryback in the bin, just over 9% of the trucks recorded during the survey period showed load volumes that could be categorised as overloading, with load volumes skewed to the right-hand side of the haul truck (potentially due to the location of the carryback material).

Uneven loading can create excessive tyre wear, add unnecessary load to suspension components and create stress through the driveline, Loadscan said.

The MPS allows operators to monitor off-centre loading by scanning the truck bin in four quadrants and generating visual warning indicators, according to the company.

West concluded: “Volumetric load scanning is an extremely valuable tool that can be utilised effectively to reduce mining operating costs and increase effective and efficient use of equipment.

“This report, which has been compiled on the back of collecting comprehensive amounts of data, indicates very clearly that the Loadscan system provides vital and useful information for operators, allowing them to work far more efficiently, generating better bottom-line returns and reducing operating costs.”

Sixth Wave and MPS team up to cut cyanide usage, costs in gold processing

Sixth Wave Innovations says it is working with Australia-based Mining and Process Solutions (MPS) on test work initiatives in North America and Australia integrating Sixth Wave’s commercially available IXOS® molecular imprinted polymer for gold extraction with the MPS GlyCat™ process.

The GlyCat process was invented to reduce cyanide consumption while maintaining gold recovery for gold ores from deposits containing nuisance copper. For gold applications, the IXOS platform, meanwhile, is capable of selectively targeting gold while rejecting contaminants such as copper, mercury, and other non-target elements potentially contained in a gold-bearing cyanide leach solution.

The two companies are also working in collaboration with the Centre Technologique des Résidus Industriels (CTRI) and a top 10 gold producer in Canada. This project aims to develop an environmentally-friendly flowsheet for the gold mining industry, examining MPS’ acidic and alkaline leaching technologies, together with Sixth Wave’s molecular imprinted IXOS resin technology for the extraction of gold from alternative lixiviants. Testing is to be undertaken on ores provided by the Canadian mining partner, Sixth Wave said.

A recent study published in the Hydrometallurgy Journal titled ‘Gold recovery from cyanide-starved glycine solutions (Glycat) in the presence of Cu using molecularly imprinted polymer IXOS-AuC’ found that “gold recovery increased, while copper recovery decreased with the increasing gold concentration”, Sixth Wave said. The adsorption behaviour of IXOS-AuC had “the best selectivity compared to three other gold selective resins”, the study added. Other outcomes from the study showed the IXOS-AuC polymer was very robust, allowing reuse without deterioration of the polymer physically (assessed by scanning electron microscopy) or in performance.

“Our collaboration with MPS is an important initiative for Sixth Wave and our IXOS high performance gold extraction products,” Dr Jon Gluckman, President & CEO of Sixth Wave, said. “The industry is keenly interested in new and innovative approaches to leach and recover gold as a replacement, in whole or in part, for conventional processes. In order to focus on lowering capital expenditure and operating expenditure, and to comply with environmental and regulatory constraints, Sixth Wave is extremely interested in leveraging our technology with the benefits of the MPS glycine leaching and recovery process.”

Ivor Bryan, Managing Director of MPS, said: “Our respective technological approaches can bring tremendous value to prospective customers by significantly cutting cyanide usage along with the associated costs and environmental impact.”

Earlier this week, Sixth Wave Innovations signed a non-binding Letter of Intent to trial its IXOS purification polymer at the Rio2 Ltd-owned Fenix gold project in Chile.