Tag Archives: springs

Kwatani large vibrating screen customisation pays off

Process plant designers often underestimate the movement of large vibrating screens when these machines start and stop, a challenge for which Kwatani says it has found an innovative and cost effective solution.

According to Kwatani’s Chief Operating Officer, Kenny Mayhew-Ridgers, the company has achieved considerable improvements in many screening applications by selectively fitting torsional springs alongside coil springs.

“It is well known that the vibrating motion of a screen impacts on the building and structural accessories around it,” Mayhew-Ridgers says. “This vibration is addressed by fitting isolators between the screen and the plant floor, and by constructing the plant building to certain minimum structural specifications.”

However, the focus is often on the frequencies that the screen generates in its steady-state phase – or the normal running phase – rather than during the transient phases when the screen is starting up or slowing down to a stop, Kwatni says.

Mayhew-Ridgers highlights that it is during these transient phases that the screen’s movement becomes amplified and potentially most destructive. Isolators between the screen and the floor – common among which are coil springs and rubber buffers – are meant to absorb vibrations and prevent damage to surrounding infrastructure. However, the transient phases, especially when stopping, can generate considerable sideways movement of the screen, which must be avoided.

“Traditional isolators like coil springs usually perform well in controlling the up-and-down movement of the screen,” he says. “Our experience is that the sideways movement, which is induced most strongly when the machine stops, can be better controlled by torsional springs.”

However, he notes that coil springs retain the advantages of being cost effective and providing a good linear isolation of the screen from the building structure. In this respect, their isolation characteristics are generally better than rubber buffers which excel in terms of their damping qualities.

“The torsional spring provides the best of both worlds, giving a good linear range for compression during operation while also becoming non-linear like the rubber buffer during stopping,” Mayhew-Ridgers says.

Using its experience observing screens operating in the field, Kwatani has developed and trialled various solutions in its dedicated testing centre at its headquarters in Kempton Park, South Africa. By optimising the best combination of coil springs and torsional springs, the company says it has succeeded in achieving the best results for customers.

“It’s not that torsional springs are better than coil springs,” Mayhew-Ridgers says. “It is about finding the right combination – through intensive testing and adaptation – for the customer’s particular requirements; we have both the expertise and the equipment to do this.”