Tag Archives: Veduga

Polymetal pushes forward with Veduga gold project development

The Board of Polymetal has approved a $447 million investment in the Veduga gold project in the Krasnoyarsk Region of Russia based on the results of a recent prefeasibility study (PFS).

Veduga was discovered in 1977 and extensively explored between 1988 and 1996. Polymetal has been a partial owner of the property since 2006 with the original 50% stake acquired through the joint venture with AngloGold Ashanti. In this time, the mining of oxide ore has started, an initial NI-compliant reserve and resources estimate was prepared and open-pit mining of sulphide ore kicked off.

The latest investment will see Polymetal target 10 years of conventional open-pit mining of five open pits until 2031 (including pre-production stripping in 2022-2024), and 12 years of underground mining using a skip shaft for hauling from 2030 to 2041. First production is expected in the June quarter of 2025. This is based off a 4 Moz reserve base grading 3.9 g/t Au.

The prefeasibility study was based on a 2 Mt/y flotation concentrator with dry stacking of tailings. This would see flotation concentrate processed at the future POX-2, while volumes in excess of the facility’s capacity will be sold to third parties.

Veduga could also potentially become a source of feed for the future Pacific POX project, Polymetal said, adding that flowsheet development has been supported by extensive external and in-house metallurgical testing.

Average life of mine annual production is estimated at 200,000 oz of gold at all-in sustaining costs of $800-850/oz.

The project is expected to materially contribute to Polymetal’s carbon emission reduction targets, relying on hydro power to ensure relatively low emission intensity level of 405 kg CO2e/oz gold equivalent in 2025-2030 on average. This is well below the group’s target of 560 kg CO2e/oz of gold equivalent by 2030, it said.

Of the $447 million capital expenditure (inclusive of capitalised pre-stripping costs), $77 million is dedicated to a “post-launch” skip shaft and underground infrastructure construction in 2027-2029. Polymetal said further studies will be undertaken to evaluate alternative ore transportation options that could reduce the capital spending. It also said it plans to use exclusively battery-electric vehicles throughout the underground mine.

The extended open pit allows to shift underground development capital costs beyond the start-up capital expenditure, Polymetal added.

Polymetal currently owns a 59.4% stake in Veduga and holds a call option to increase its stake to 100% at a pre-determined price giving VTB Bank a fixed rate of return on initial investment. Following the final statutory clearance – expected in the June quarter of 2022 – Polymetal plans to fully consolidate the asset.

Polymetal 2020 profits rise as it accelerates ESG efforts

Polymetal recorded a strong set of financials in 2020, with its revenue, adjusted EBITDA and net earnings metrics all benefitting from higher production volumes and commodity prices.

Revenue increased by 28% year-on-year to $2.87 billion, adjusted EBITDA rose 57% to $1.69 billion and net earnings hit a record $1.09 billion in 2020.

The company’s 2020 gold-equivalent output amounted to 1.56 Moz, a 4% increase year-on-year and 4% above the original production guidance of 1.5 Moz. Strong contributions from its Kyzyl, Varvara and Albazino mines offset a planned grade decline at Voro, as well as lower production at Svetloye, the company said.

While production rose, the company’s greenhouse gas emissions intensity reduced by 4%, Polymetal said. It attributed this to energy efficiency initiatives, switching its mining fleet to electric vehicles, a shift from diesel to grid energy sources and green energy contracts.

Back in December, SMT Scharf AG signed an agreement with Polymetal to develop and produce battery-electric powered LHDs and mid-range underground trucks as prototypes for its gold and silver mines, with these units to be delivered to the company by October 2021.

Polymetal’s environmental, social and governance efforts did not stop there.

In 2020, the company invested $29 million at its Omolon hub in the Magadan region of Russia. This capital expenditure was mainly related to the construction of a dry tailings storage facility and engineering and preparatory works for a 2.5 MW solar plant (due to come online this year). This will be joined by another 5-10 MW solar facility at its Kyzyl operation (Kazakhstan) in 2022.

On its other tailings facilities, Polymetal said: “We operate eight tailings dams in Russia and Kazakhstan; each is rigorously monitored daily. We are confident that any emergency dam failure would have no impact on local communities and employees.

“We welcome the new Global Industry Standard on Tailings Management and have committed to achieving compliance in all operations by 2023.”

In addition to state authority inspections of these facilities, the company conducted an independent third-party audit of its Mayskoye (Chukotka, Russia) tailings site, which was carried out virtually, due to COVID-19 restrictions, by Knight Piésold Ltd. “To further improve tailings safety and minimise the risk of the possibility of dam failure, we are shifting towards dry stack storage methods,” it said.

“Such facilities are already in operation at our Amursk and Voro (pictured filter press) mines, and will be extended to Omolon (2021), Nezhda (2021), POX-2 (2022), Dukat (2024) and Veduga (2025).”