Tag Archives: mining OEMs

Mine automation starting to take hold, RFC Ambrian says

In its second report in a series on innovation and new technology in the mining industry, RFC Ambrian has tackled the subject of autonomous mining equipment, which, the authors say, has reached an “important level of maturity”.

The report considered both surface and underground equipment, but most notably surface mine haulage trucks where there has been an area of significant focus for major mining companies.

As the authors said: “This has reached an important level of maturity, although it is still evolving and its penetration across the industry is still in its infancy.”

AHS

The Autonomous Haulage Systems (AHS) have evolved from improvements in GPS for positioning and navigation, developments in sensors and detection –particularly radar and LiDAR, improved computing power and on-board monitoring, faster and more reliable networks and internet connection, and the development of effective and accurate algorithms and software, the authors said.

“AHS has appeared , first, at large mine operations where the benefits have the largest impacts, due to the high component of fixed costs in an AHS operation, and in developed countries where there is a shortage of skilled workers and labour costs are higher,” they said.

Outlining the potential benefits of AHS is straightforward, but finding hard data to support it is more difficult, according to the authors.

“Companies have made suggestions about the scale of improvement, but they are light on detail, definitions are not clear, and the data varies between companies,” the authors said.

Suggested improvements in productivity have come from Caterpillar (15-20%), Fortescue Metals Group (30%), Komatsu (15%), and Rio Tinto (15%), according to the authors.

“These improvements are still meaningful, and corporate companies would argue that every mine is different and that the mining companies and original equipment manufacturers (OEMs) that have so far implemented AHS have the right to guard this proprietary information and hold on to the competitive advantage,” the authors said.

Autonomy in other surface equipment

The authors said they are also now seeing this same technology used to automate other operations in the surface mine. This includes drill rigs, dozers, loaders and ancillary equipment.

“Much of this equipment is currently, at best, semi-autonomous, although a few mines have implemented fully-autonomous drill rigs and dozers,” they noted.

“Moving this equipment to full autonomy offers significant production improvements, although the scale of actual savings is not likely to be as great as those achieved with AHS,” the authors said.

“However, we have not yet seen quantified the downstream benefits of the resultant improved drilling and blasting.

“The automation of earth moving machines provides another step to increased productivity within the mine. However, loaders face additional challenges as a result of the variability of the loading face and the risk of collisions with the haulage trucks.”

Due to the complex nature of the bucket-media interaction, developing automatic loading functions that are better than or equal to expert manual drivers with regard to performance is a highly difficult task, according to the authors.

“As a result, fully-autonomous loading is not yet commercially available. Some observers suggest that the implementation of fully-autonomous surface loading is still some five years away, while others believe that full automation is unlikely.”

Underground mining

When it comes to underground mining, the authors of the report said, as with surface mining, full autonomy remains the goal.

“Mining companies and contractors are constantly looking to use technological developments to better utilise their investment in equipment and human resources and improve safety,” the authors said. “Particular features of traditional underground mines are: long unproductive periods caused by re-entry times required for operators after blasting; and higher health and safety risks due to geotechnical and environmental challenges.

“The use of autonomy underground aims to increase the productivity of the equipment and improve the safety of the operators.”

While the aims remain the same, full autonomy in the underground mine is not as advanced as in the surface mine, according to the authors.

“Haul trucks are used less frequently in underground mines, although a few mines are using haul trucks with AHS. More underground mines perform a short cycle of loading, hauling and dumping from a draw point to a tipping point with LHD equipment.

“Implementation of autonomous systems underground for LHDs is occurring, however, as with surface loading, one of the major hurdles to automating LHDs is replacing human judgement required for filling the bucket.”

This has seen full autonomy being used for the hauling and dumping cycle, but semi-autonomy usually used for loading, according to the authors. “Successful trials of fully- autonomous LHDs have been achieved and Sandvik i-series now offers an automated bucket filling assistant as a standard function,” they said.

Underground drilling operations, meanwhile, are achieving increased levels of autonomy but are also presently only semi-autonomous.

Robotic rail operations

The authors then looked at autonomous rail haulage systems, a segment of the market that has gained in prominence in the past few years thanks to initiatives such as Rio Tinto’s AutoHaul in the Pilbara of Western Australia.

The authors said: “There has been some form of automation on worldwide metro systems for many years, but one area where autonomous technology has yet to gain a foothold is rail freight. Trials are underway in Holland and Germany but implementing autonomous train driving on a complex rail network, with passenger trains and freight trains, is more difficult than on a metro system.”

The one exception to this is in the mining sector and AutoHaul, they said, where Rio has completed commissioning of the world’s first fully-autonomous, long distance, heavy-haul rail network which is now in full operation.

Pace of implementation

Despite the acclaimed success and the relative level of maturity of the technology, the wider implementation of AHS does not appear to be happening very fast, the authors argue.

“The systems of both the two main suppliers (Caterpillar and Komatsu) are well proven and have delivered positive results, although, according to consultants, both systems also have examples of less-than-expected performance.

“Nevertheless, the technical issues appear relatively minor and there is interest right across the industry but, in spite of the potentially significant benefits, more mines are not now using AHS.”

There are a number of likely reasons for this, the authors said, explaining that one of the most important is a lack of skilled personnel.

“We believe there is a lack of in-depth knowledge of the technology and limited personnel with the requisite experience, skills, and training throughout the industry’s hierarchy,” they said.

“Further, there is a shortage of skilled autonomous operators, developers, and consultants, some of who are moving to the autonomous auto market.”

Important factors in the success of AHS appear to be the level of management commitment, planning, and focus in the implementation, with the best results reported from well-operated mining sites, the authors said.

“Another factor is likely to be limitations on equipment supply from OEMs for new equipment and truck conversions, either due to manufacturing backlogs or maybe market caution, limiting investment. This is allowing the OEMs to be more selective in their customers.”

The authors cautioned: “However, if the existing suppliers do not develop additional capacity quick enough this could create opportunities for additional entrants in to the market.”

Capital availability in the mining industry could also be an issue holding back AHS advancement, they said, although it is less tight than it has been in recent years.

“Certainly, some lower-margin operations might struggle to finance the capital, although the uplift in relative profitability could be transformational, with relatively quick paybacks,” they said.
And the historical conservatism of the mining industry is also likely to be a factor, the authors said.

“There is still a natural reluctance within the industry to adopt new or unproven technology due to the high capital cost involved and the potential operational and reputational risks involved.

“This will be compounded if the organisation has limited experience and limited access to the technology.”

You can read the full report here.

VDMA sees revenue jump for German mining OEMs

For the first time since the crisis years, post-2013, there will be an increase in the turnover generated by the German mining equipment manufacturers this year, according to Germany’s Mechanical Engineering Industry Association (VDMA).

The VDMA expects turnover to jump around 12% to nearly €3.1 billion ($3.51 billion) in 2018, with further growth expected for the coming year, it said.

The bulk of this growth is expected to come from overseas markets, according to the VDMA.

“For German manufacturers of mining equipment, the domestic market now only plays a minor role in their business plans, with a total turnover expected to decline by 22% to €90 million in 2018,” the VDMA said.

According to Michael Schulte Strathaus, Chairman of VDMA Mining (pictured), the current policies in Germany demonstrate little affinity for the business of raw materials, and therefore mining, and are highly unlikely to provide any impetus for domestic business.

And, some 25% of exports are delivered to EU countries, a figure which has declined from the 31% achieved in 2017, with the biggest customers being Italy, Austria, Poland, France and Belgium.

Schulte Strathaus said the market is primarily marked by major infrastructure projects that will gradually be completed with no adequate replacements in sight. The VDMA, therefore, expects stagnant exports to EU countries in 2019, with a slight increase at best.

On the more positive side, the US’s share of the total export volume will increase from 15% in the past year to 17% this year, according to the VDMA.

Schulte Strathaus cited President Donald Trump’s changes to energy policies as one of the reasons for this development.

“Restrictions have been loosened, an effect which has led to an increased use of hard coal mined in the USA. This has led to considerable demand for machines that can increase productivity, and consequentially, profit; a development which benefits German manufacturers, in particular. The industry is expecting a further moderate increase in exports to the USA in the coming year,” the VDMA said.

And, German mining equipment manufacturers are also enjoying healthy business with China, with the export share to the country expected to increase to 10% this year from 7% last year. Schulte Strathaus said policymakers in China now grasped that establishing high-performance mines can only be realised to a limited extent with only domestic technology.

“German manufacturers provide technologies that are either unavailable in China or only available to a very limited degree, however, China is making considerable efforts to close existing technology gaps,” the VDMA said.

Schulte Strathaus said: “We still have an edge when it comes to extraction technology, especially in underground mining. However, we do not know how long we will be able to maintain our lead, or perhaps expand it.”

The industry expects that its exports to China will increase further over the coming year.