Tag Archives: TOMRA

Two Mile Hill underground mine concept a step closer following ore sorting trials

The stage two ore sorting campaign on drill core from Middle Island Resources’ Two Mile Hill tonalite gold deposit in Western Australia has confirmed the technology’s potential to improve gold grades and cut waste processing.

Two Mile Hill, part of the wider Sandstone gold project, comprises a “ubiquitously gold mineralised, tonalite (granite) plug or stock”. At surface, the deposit measures some 250 m in length, 80-90 m width and extends to at least 700 m depth. It is some 4km north of the company’s 600,000 tonne per year Sandstone processing plant.

Middle Island has been looking for ways to improve the economics of mining the deposit through the use of ore sorting technology. This followed recognition that more than 96% of the gold at Two Mile hill was hosted by quartz veins within the tonalite. The deposit hosts 391,000 ounces of gold inferred resources grading 1.35 grams per tonne, according to a 2004 JORC study.

Stage one trials, using X-ray and optical sensors, indicated sorting could deliver a 185-257% increase in feed grade, with gold recoveries in excess of 93%. Up to 64% of the sorter feed material could be rejected, delivering significant economic benefits.

While stage one focused on the concept of selective underground mining with open stoping – therefore, using diamond core intervals with a higher head grade – the latest trials envisaged sub-level caving and took into account core that was representative of the entire sample.

A series of four primary (fresh) composites and a single transitional (partially oxidised) composite comprising intervals of half HQ and half PQ diamond core from hole MSDD261 were selected for crushing prior to ore sorting.

The results from stage two trials, which involved initial sighter and scoping tests at both Steinert in Perth and TOMRA in Sydney before moving onto the latter’s commercial scale sorting equipment and a combination of colour and X-ray sensors, were “broadly in line with the earlier scoping trials”, Middle Island said.

Sorting of the primary composites (A, B and C) resulted in upgrades to the sorted concentrate in the range of 155-213%, with the majority of gold selected by way of colour differentiation. Sorting recoveries for primary composites ranged from 67-93%, while sorting yields (percentage of feed reporting to product) ranged from 39-51%.

Middle Island said: “Recoveries and yields are variable, and somewhat lower than demonstrated in the preliminary work, in part due to the higher proportion of fines generates by crushing the larger diameter core and in part by weaker oxidation and associated iron-staining in material comprising Primary Composite A.”

These results are a precursor to an updated resource estimate for the upper half of the 0.9-1.5 million ounce exploration target at Two Mile Hill and an underground mining study.

The company thinks further work is needed to ascertain the factors that give rise to the variance in recoveries between the samples, with stage three ore sorting testwork likely focusing on these aspects and anticipated enhancements using TOMRA’s recently commissioned, commercial-scale, laser sorting unit.

TOMRA XRT ore sorter starts to pay off at Stornoway’s Renard diamond op

The June quarter at Stornoway Diamonds’ Renard diamond operation in Quebec, Canada, started to show the positive results of using ore sorting technology.

Commissioning of the TOMRA X -Ray transmission plant commenced in March and was completed during the most recent quarter.

Among a quarter that saw lower quarter-on-quarter carat production (223,351 carats) and diamond grade (40 carats per hundred tonne) – previously expected with the transition from openpit to underground mining – the initial performance of the ore sorting plant stood out.

Stornoway said: “The new ore sorting plant at Renard … has been processing ore on a consistent basis since mid-May. The volume and quality of waste segregated from the ore feed has exceeded expectations, with waste rejected representing between 15% and 30% of material sorted.”

The company noted that kimberlite content in the waste stream had averaged between 1% and 2%.

And, the TOMRA ore sorter has even reduced Renard’s power requirements, according to Stornoway.

“Because the waste within the Renard ore is hard and difficult to crush, its rejection from the main process plant has also resulted in a net reduction in power consumption for processing even with the addition of the new sorting circuit,” Stornoway said.

“Considering the highly abrasive characteristics of the ore processed to date through the plant, consisting mainly of highly diluted, low grade material, the diamonds recovered since its introduction have exhibited lower levels of breakage than observed previously with comparable feed composition.”

Stornoway CEO Matt Manson said these initial diamond results were encouraging and, given the volume and quality of the waste being rejected, the company saw potential for upping processing capacity in its plant beyond the current nameplate rating.

As a result, Stornoway is now thinking about developing a modified mine plan to support the accelerated mining required.

Just last week, a TOMRA XRT ore sorter was commissioned at the Renison tin mine in Australia, with the operators expecting a 15-20% increase in tin production with its introduction.